EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Craniofacial 3D Morphometric Analysis with Smartphone-Based Photogrammetry

Omar C Quispe-Enriquez iD, Juan José Valero-Lanzuela iD, José Luis Lerma iD

Sensors · 2023

DOI: 10.3390/s24010230 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, 2023. Verfasst von Omar C Quispe-Enriquez und 2 weiteren Autor:innen. Beteiligte Einrichtung: Photogrammetry and Laser Scanner Research Group (GIFLE), Department of Cartographic Engineering, Geodesy and Photogrammetry, Universitat Politècnica …. Hauptthemen laut MEDLINE: Smartphone, Benchmarking. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Instituto de Salud Carlos III, European Union.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Obtaining 3D craniofacial morphometric data is essential in a variety of medical and educational disciplines. In this study, we explore smartphone-based photogrammetry with photos and video recordings as an effective tool to create accurate and accessible metrics from head 3D models. The research involves the acquisition of craniofacial 3D models on both volunteers and head mannequins using a Samsung Galaxy S22 smartphone. For the photogrammetric processing, Agisoft Metashape v 1.7 and PhotoMeDAS software v 1.7 were used. The Academia 50 white-light scanner was used as reference data (ground truth). A comparison of the obtained 3D meshes was conducted, yielding the following results: 0.22 ± 1.29 mm for photogrammetry with camera photos, 0.47 ± 1.43 mm for videogrammetry with video frames, and 0.39 ± 1.02 mm for PhotoMeDAS. Similarly, anatomical points were measured and linear measurements extracted, yielding the following results: 0.75 mm for photogrammetry, 1 mm for videogrammetry, and 1.25 mm for PhotoMeDAS, despite large differences found in data acquisition and processing time among the four approaches. This study suggests the possibility of integrating photogrammetry either with photos or with video frames and the use of PhotoMeDAS to obtain overall craniofacial 3D models with significant applications in the medical fields of neurosurgery and maxillofacial surgery.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

SmartphoneBenchmarkingHumansLightManikinsPhotogrammetry

Stichwörter der Autor:innen

3D model3D scanningcranial facialphotogrammetrysmartphone device

Autor:innen und Institutionen

  • Photogrammetry and Laser Scanner Research Group (GIFLE), Department of Cartographic Engineering, Geodesy and Photogrammetry, Universitat Politècnica de València, Camino de Vera s/n, 46022 Valencia, Spain.

ORCID-Profile: Omar C Quispe-Enriquez, Juan José Valero-Lanzuela, José Luis Lerma

Förderung

  • Instituto de Salud Carlos III
  • European Union

Zitieren

APA

Quispe-Enriquez, O. C., Valero-Lanzuela, J. J., & Lerma, J. L. (2023). Craniofacial 3D Morphometric Analysis with Smartphone-Based Photogrammetry. Sensors. https://doi.org/10.3390/s24010230

Vancouver

Quispe-Enriquez OC, Valero-Lanzuela JJ, Lerma JL. Craniofacial 3D Morphometric Analysis with Smartphone-Based Photogrammetry. Sensors. 2023. doi:10.3390/s24010230

BibTeX
@article{QuispeEnriquez2023,
  author = {Quispe-Enriquez, Omar C and Valero-Lanzuela, Juan José and Lerma, José Luis},
  title = {Craniofacial 3D Morphometric Analysis with Smartphone-Based Photogrammetry},
  journal = {Sensors},
  year = {2023},
  doi = {10.3390/s24010230}
}
Kostenlos starten →