EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design, Fabrication, and Characterization of Inkjet-Printed Organic Piezoresistive Tactile Sensor on Flexible Substrate

Olalekan O Olowo iD, Bryan Harris, Daniel Sills, Ruoshi Zhang, Andriy Sherehiy, Alireza Tofangchi iD, Danming Wei, Dan O Popa

Sensors · 06.10.2023 · 23 (19) · 8280

DOI: 10.3390/s23198280 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 06.10.2023. Verfasst von Olalekan O Olowo und 7 weiteren Autor:innen. Beteiligte Einrichtung: Louisville Automation & Robotics Research Institute, University of Louisville, Louisville, KY 40208, USA. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this paper, we propose a novel tactile sensor with a “fingerprint” design, named due to its spiral shape and dimensions of 3.80 mm × 3.80 mm. The sensor is duplicated in a four-by-four array containing 16 tactile sensors to form a “SkinCell” pad of approximately 45 mm by 29 mm. The SkinCell was fabricated using a custom-built microfabrication platform called the NeXus which contains additive deposition tools and several robotic systems. We used the NeXus’ six-degrees-of-freedom robotic platform with two different inkjet printers to deposit a conductive silver ink sensor electrode as well as the organic piezoresistive polymer PEDOT:PSS-Poly (3,4-ethylene dioxythiophene)-poly(styrene sulfonate) of our tactile sensor. Printing deposition profiles of 100-micron- and 250-micron-thick layers were measured using microscopy. The resulting structure was sintered in an oven and laminated. The lamination consisted of two different sensor sheets placed back-to-back to create a half-Wheatstone-bridge configuration, doubling the sensitivity and accomplishing temperature compensation. The resulting sensor array was then sandwiched between two layers of silicone elastomer that had protrusions and inner cavities to concentrate stresses and strains and increase the detection resolution. Furthermore, the tactile sensor was characterized under static and dynamic force loading. Over 180,000 cycles of indentation were conducted to establish its durability and repeatability. The results demonstrate that the SkinCell has an average spatial resolution of 0.827 mm, an average sensitivity of 0.328 mΩ/Ω/N, expressed as the change in resistance per force in Newtons, an average sensitivity of 1.795 µV/N at a loading pressure of 2.365 PSI, and a dynamic response time constant of 63 ms which make it suitable for both large area skins and fingertip human–robot interaction applications.

Schlagwörter

Stichwörter der Autor:innen

PEDOT:PSSadditive manufacturingaerosol jet printingstrain gaugetactile sensor

Autor:innen und Institutionen

  • Louisville Automation & Robotics Research Institute, University of Louisville, Louisville, KY 40208, USA.

ORCID-Profile: Olalekan O Olowo, Alireza Tofangchi

Förderung

  • National Science Foundation

Zitieren

APA

Olowo, O. O., Harris, B., Sills, D., Zhang, R., Sherehiy, A., Tofangchi, A., Wei, D., & Popa, D. O. (2023). Design, Fabrication, and Characterization of Inkjet-Printed Organic Piezoresistive Tactile Sensor on Flexible Substrate. Sensors, 23(19), 8280. https://doi.org/10.3390/s23198280

Vancouver

Olowo OO, Harris B, Sills D, Zhang R, Sherehiy A, Tofangchi A, et al. Design, Fabrication, and Characterization of Inkjet-Printed Organic Piezoresistive Tactile Sensor on Flexible Substrate. Sensors. 2023;23(19):8280. doi:10.3390/s23198280

BibTeX
@article{Olowo2023,
  author = {Olowo, Olalekan O and Harris, Bryan and Sills, Daniel and Zhang, Ruoshi and Sherehiy, Andriy and Tofangchi, Alireza and Wei, Danming and Popa, Dan O},
  title = {Design, Fabrication, and Characterization of Inkjet-Printed Organic Piezoresistive Tactile Sensor on Flexible Substrate},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {19},
  pages = {8280},
  doi = {10.3390/s23198280}
}
Kostenlos starten →