EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Flexible Electromagnetic Sensor with Inkjet-Printed Silver Nanoparticles on PET Substrate for Chemical and Biomedical Applications

Muhammad Usman Ejaz, Tayyaba Irum iD, Muhammad Qamar, Akram Alomainy

Sensors · 10.10.2024 · 24 (20) · 6526

DOI: 10.3390/s24206526 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 10.10.2024. Verfasst von Muhammad Usman Ejaz und 3 weiteren Autor:innen. Beteiligte Einrichtung: Dyson Institute of Engineering and Technology, Malmesbury SN16 0RP, UK. Hauptthemen laut MEDLINE: Silver, Metal Nanoparticles. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

For this article, a low-cost, compact, and flexible inkjet-printed electromagnetic sensor was investigated for its chemical and biomedical applications. The investigated sensor design was used to estimate variations in the concentration of chemicals (ethanol and methanol) and biochemicals (hydrocortisone—a chemical derivative of cortisol, a biomarker of stress and cardiovascular effects). The proposed design’s sensitivity was further improved by carefully choosing the frequency range (0.5–4 GHz), so that the analyzed samples showed approximately linear variations in their dielectric properties. The dielectric properties were measured using a vector network analyzer (VNA) and an Agilent 85070E Dielectric Probe Kit. The sensor design had a resonant frequency at 2.2 GHz when investigated without samples, and a consistent shift in resonant frequency was observed, with variation in the concentrations of the investigated chemicals. The sensitivity of the designed sensor is decent and is comparable to its non-flexible counterparts. Furthermore, the simulation and measured results were in agreement and were comparable to similar investigated sensor prototypes based on non-flexible Rogers substrates (Rogers RO4003C) and Rogers Droid/RT 5880), demonstrating true potential for chemical, biomedical applications, and healthcare.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

SilverMetal NanoparticlesBiosensing TechniquesElectromagnetic PhenomenaEthanolPrintingHydrocortisoneMethanolPolyethylene Terephthalates

Stichwörter der Autor:innen

PET substrateflexiblehydrocortisonemetamaterials

Substanzen

SilverEthanolHydrocortisoneMethanolPolyethylene Terephthalates

Autor:innen und Institutionen

  • Dyson Institute of Engineering and Technology, Malmesbury SN16 0RP, UK.
  • School of Electronic Engineering and Computer Science, Queen Mary University of London, London E1 4NS, UK.

ORCID-Profile: Tayyaba Irum

Zitieren

APA

Ejaz, M. U., Irum, T., Qamar, M., & Alomainy, A. (2024). Flexible Electromagnetic Sensor with Inkjet-Printed Silver Nanoparticles on PET Substrate for Chemical and Biomedical Applications. Sensors, 24(20), 6526. https://doi.org/10.3390/s24206526

Vancouver

Ejaz MU, Irum T, Qamar M, Alomainy A. Flexible Electromagnetic Sensor with Inkjet-Printed Silver Nanoparticles on PET Substrate for Chemical and Biomedical Applications. Sensors. 2024;24(20):6526. doi:10.3390/s24206526

BibTeX
@article{Ejaz2024,
  author = {Ejaz, Muhammad Usman and Irum, Tayyaba and Qamar, Muhammad and Alomainy, Akram},
  title = {Flexible Electromagnetic Sensor with Inkjet-Printed Silver Nanoparticles on PET Substrate for Chemical and Biomedical Applications},
  journal = {Sensors},
  year = {2024},
  volume = {24},
  number = {20},
  pages = {6526},
  doi = {10.3390/s24206526}
}
Kostenlos starten →