EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Humidity Sensor Composed of Laser-Induced Graphene Electrode and Graphene Oxide for Monitoring Respiration and Skin Moisture

Xianxiang Fei iD, Junyi Huang, Wenqing Shi iD

Sensors · 29.07.2023 · 23 (15) · 6784

DOI: 10.3390/s23156784 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 29.07.2023. Verfasst von Xianxiang Fei und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Electronics and Information Engineering, Guangdong Ocean University, Zhanjiang 524088, China. Hauptthemen laut MEDLINE: Graphite. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Guangdong Ocean University Education Quality Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Respiratory rate and skin humidity are important physiological signals and have become an important basis for disease diagnosis, and they can be monitored by humidity sensors. However, it is difficult to employ high-quality humidity sensors on a broad scale due to their high cost and complex fabrication. Here, we propose a reliable, convenient, and efficient method to mass-produce humidity sensors. A capacitive humidity sensor is obtained by ablating a polyimide (PI) film with a picosecond laser to produce an interdigital electrode (IDE), followed by drop-casting graphene oxide (GO) as a moisture-sensitive material on the electrode. The sensor has long-time stability, a wide relative humidity (RH) detection range from 10% to 90%, and high sensitivity (3862 pF/%RH). In comparison to previous methods, the technology avoids the complex procedures and expensive costs of conventional interdigital electrode preparation. Furthermore, we discuss the effects of the electrode gap size and the amount of graphene oxide on humidity sensor performance, analyze the humidity sensing mechanism by impedance spectrum, and finally perform the monitoring of human respiratory rate and skin humidity change in a non-contact manner.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

GraphiteHumansHumidityElectrodesLasersRespiratory Rate

Stichwörter der Autor:innen

graphene oxidehumidity sensorsinterdigital electrodelaser-induced graphenerespiration monitoring

Substanzen

graphene oxideGraphite

Autor:innen und Institutionen

  • School of Electronics and Information Engineering, Guangdong Ocean University, Zhanjiang 524088, China.
  • College of Mechanical Engineering, Guangdong Ocean University, Zhanjiang 524088, China.

ORCID-Profile: Xianxiang Fei, Wenqing Shi

Förderung

  • National Natural Science Foundation of China
  • Guangdong Ocean University Education Quality Project

Zitieren

APA

Fei, X., Huang, J., & Shi, W. (2023). Humidity Sensor Composed of Laser-Induced Graphene Electrode and Graphene Oxide for Monitoring Respiration and Skin Moisture. Sensors, 23(15), 6784. https://doi.org/10.3390/s23156784

Vancouver

Fei X, Huang J, Shi W. Humidity Sensor Composed of Laser-Induced Graphene Electrode and Graphene Oxide for Monitoring Respiration and Skin Moisture. Sensors. 2023;23(15):6784. doi:10.3390/s23156784

BibTeX
@article{Fei2023,
  author = {Fei, Xianxiang and Huang, Junyi and Shi, Wenqing},
  title = {Humidity Sensor Composed of Laser-Induced Graphene Electrode and Graphene Oxide for Monitoring Respiration and Skin Moisture},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {15},
  pages = {6784},
  doi = {10.3390/s23156784}
}
Kostenlos starten →