EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Automatic Life Detection Based on Efficient Features of Ground-Penetrating Rescue Radar Signals

Di Shi iD, Gunnar Gidion iD, Leonhard M Reindl iD, Stefan J Rupitsch iD

Sensors · 28.07.2023 · 23 (15) · 6771

DOI: 10.3390/s23156771 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 28.07.2023. Verfasst von Di Shi und 3 weiteren Autor:innen. Beteiligte Einrichtung: Laboratory for Electrical Instrumentation and Embedded Systems, Department of Microsystems Engineering-IMTEK, University of Freiburg, Georges-Köhler-…. Hauptthemen laut MEDLINE: Radar, Respiratory Rate. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Federal Ministry of Education and Research, German Federal Ministry of Education and Research (BMBF).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Good feature engineering is a prerequisite for accurate classification, especially in challenging scenarios such as detecting the breathing of living persons trapped under building rubble using bioradar. Unlike monitoring patients’ breathing through the air, the measuring conditions of a rescue bioradar are very complex. The ultimate goal of search and rescue is to determine the presence of a living person, which requires extracting representative features that can distinguish measurements with the presence of a person and without. To address this challenge, we conducted a bioradar test scenario under laboratory conditions and decomposed the radar signal into different range intervals to derive multiple virtual scenes from the real one. We then extracted physical and statistical quantitative features that represent a measurement, aiming to find those features that are robust to the complexity of rescue-radar measuring conditions, including different rubble sites, breathing rates, signal strengths, and short-duration disturbances. To this end, we utilized two methods, Analysis of Variance (ANOVA), and Minimum Redundancy Maximum Relevance (MRMR), to analyze the significance of the extracted features. We then trained the classification model using a linear kernel support vector machine (SVM). As the main result of this work, we identified an optimal feature set of four features based on the feature ranking and the improvement in the classification accuracy of the SVM model. These four features are related to four different physical quantities and independent from different rubble sites.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

RadarRespiratory RateHumansSupport Vector Machine

Stichwörter der Autor:innen

binary classificationfeature engineeringground penetrating radar (GPR)life detectionminimum redundancy maximum relevance (MRMR)one-way analysis of variance (ANOVA)rescue radarrespiratory signalsupport vector machine (SVM)

Autor:innen und Institutionen

  • Laboratory for Electrical Instrumentation and Embedded Systems, Department of Microsystems Engineering-IMTEK, University of Freiburg, Georges-Köhler-Allee 106, 79110 Freiburg, Germany.

ORCID-Profile: Di Shi, Gunnar Gidion, Leonhard M Reindl, Stefan J Rupitsch

Förderung

  • Federal Ministry of Education and Research
  • German Federal Ministry of Education and Research (BMBF)

Zitieren

APA

Shi, D., Gidion, G., Reindl, L. M., & Rupitsch, S. J. (2023). Automatic Life Detection Based on Efficient Features of Ground-Penetrating Rescue Radar Signals. Sensors, 23(15), 6771. https://doi.org/10.3390/s23156771

Vancouver

Shi D, Gidion G, Reindl LM, Rupitsch SJ. Automatic Life Detection Based on Efficient Features of Ground-Penetrating Rescue Radar Signals. Sensors. 2023;23(15):6771. doi:10.3390/s23156771

BibTeX
@article{Shi2023,
  author = {Shi, Di and Gidion, Gunnar and Reindl, Leonhard M and Rupitsch, Stefan J},
  title = {Automatic Life Detection Based on Efficient Features of Ground-Penetrating Rescue Radar Signals},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {15},
  pages = {6771},
  doi = {10.3390/s23156771}
}
Kostenlos starten →