Flexible Pressure Sensors for Integration into Karate Body Protector
Sensors · 19.07.2023 · 23 (14) · 6524
DOI: 10.3390/s23146524 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 19.07.2023. Verfasst von Derya Tama Birkocak und 2 weiteren Autor:innen. Beteiligte Einrichtung: 2C2T-Centre for Textile Science and Technology, University of Minho, 4800-058 Guimarães, Portugal. Hauptthemen laut MEDLINE: Wearable Electronic Devices, Martial Arts. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundação para a Ciência e Tecnologia, European Cooperation in Science and Technology, National Founds through FCT/MCTES.
Abstract (Originalsprache)
The increasing interest in karate has also attracted the attention of researchers, especially in combining the equipment used by practitioners with technology to prevent injuries, improve technical skills and provide appropriate scoring. Contrary to the sport of taekwondo, the development of a smart body protector in the sport of karate is still a niche field to be researched. This study focused on developing piezoresistive, textile-based pressure sensors using piezoresistive film, conductive fabric as well as different bonding materials and methods. Primarily, small-scale sensors were produced using ultrasonic welding, hot press welding and oven curing. These were characterized using a universal testing machine and specific conditioning and data-acquisition hardware combined with custom processing software. Large-scale sensors were then manufactured to be placed inside the karate body protector and characterized using cyclic testing. The conditioning circuit allows flexible gain adjustment, and it was possible to obtain a stable signal with an output of up to 0.03 V/N, an adequate signal for the tested force range. The transfer function shows some drift over the cycles, in addition to the expected hysteresis and slight nonlinearity, which can be compensated for. Finally, the configuration with the best results was tested in real practice tests; during these tests the body protector was placed on a dummy as well as on a person. The results showed that the piezoresistive textile-based pressure sensor produced is able to detect and quantify the impact of even light punches, providing an unobtrusive means for performance monitoring and score calculation for competitive practice of this sport.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- 2C2T-Centre for Textile Science and Technology, University of Minho, 4800-058 Guimarães, Portugal.
- Textile Engineering Department, Ege University, 35040 İzmir, Türkiye.
- Textile Engineering Department, University of Minho, 4800-058 Guimarães, Portugal.
ORCID-Profile: Derya Tama Birkocak, Helder Carvalho
Förderung
- Fundação para a Ciência e Tecnologia
- European Cooperation in Science and Technology
- National Founds through FCT/MCTES
Zitieren
APA
Tama Birkocak, D., Gomes, P., & Carvalho, H. (2023). Flexible Pressure Sensors for Integration into Karate Body Protector. Sensors, 23(14), 6524. https://doi.org/10.3390/s23146524
Vancouver
Tama Birkocak D, Gomes P, Carvalho H. Flexible Pressure Sensors for Integration into Karate Body Protector. Sensors. 2023;23(14):6524. doi:10.3390/s23146524
BibTeX
@article{TamaBirkocak2023,
author = {Tama Birkocak, Derya and Gomes, Pedro and Carvalho, Helder},
title = {Flexible Pressure Sensors for Integration into Karate Body Protector},
journal = {Sensors},
year = {2023},
volume = {23},
number = {14},
pages = {6524},
doi = {10.3390/s23146524}
}
EUVIMED