EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evaluation of the Vibration Signal during Milling Vertical Thin-Walled Structures from Aerospace Materials

Szymon Kurpiel iD, Krzysztof Zagórski iD, Jacek Cieślik, Krzysztof Skrzypkowski iD, Witold Brostow

Sensors · 14.07.2023 · 23 (14) · 6398

DOI: 10.3390/s23146398 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 14.07.2023. Verfasst von Szymon Kurpiel und 4 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical Engineering and Robotics, AGH University of Science and Technology, Mickiewicza 30 Av., 30-059 Krakow, Poland. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: AGH University of Science and Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The main functions of thin-walled structures—widely used in several industries—are to reduce the weight of the finished product and to increase the rigidity of the structure. A popular method for machining such components, often with complex shapes, is using milling. However, milling involves undesirable phenomena. One of them is the occurrence of vibrations caused by the operation of moving parts. Vibrations strongly affect surface quality and also have a significant impact on tool wear. Cutting parameters, machining strategies and tools used in milling constitute some of the factors that influence the occurrence of vibrations. An additional difficulty in milling thin-walled structures is the reduced rigidity of the workpiece—which also affects vibration during machining. We have compared the vibration signal for different approaches to machining thin-walled components with vertical walls made of Ti6Al4V titanium alloy and Inconel 625 nickel alloy. A general-purpose cutting tool for machining any type of material was used along with tools for high-performance machining and high-speed machining adapted for titanium and nickel alloys. A comparison of results was made for a constant material removal rate. The Short-Time Fourier Transform (STFT) method provided the acceleration vibration spectrograms for individual samples.

Schlagwörter

Stichwörter der Autor:innen

acceleration vibrationaerospace materialmillingnickel alloyshort-time Fourier transformtitanium alloyvertical thin-walled elements

Autor:innen und Institutionen

  • Faculty of Mechanical Engineering and Robotics, AGH University of Science and Technology, Mickiewicza 30 Av., 30-059 Krakow, Poland.
  • Faculty of Civil Engineering and Resource Management, AGH University of Science and Technology, Mickiewicza 30 Av., 30-059 Krakow, Poland.
  • Laboratory of Advanced Polymers & Optimized Materials (LAPOM), Department of Materials Science and Engineering, University of North Texas, 3940 North Elm Street, Denton, TX 76207, USA.
  • Department of Physics, University of North Texas, 3940 North Elm Street, Denton, TX 76207, USA.

ORCID-Profile: Szymon Kurpiel, Krzysztof Zagórski, Krzysztof Skrzypkowski

Förderung

  • AGH University of Science and Technology

Zitieren

APA

Kurpiel, S., Zagórski, K., Cieślik, J., Skrzypkowski, K., & Brostow, W. (2023). Evaluation of the Vibration Signal during Milling Vertical Thin-Walled Structures from Aerospace Materials. Sensors, 23(14), 6398. https://doi.org/10.3390/s23146398

Vancouver

Kurpiel S, Zagórski K, Cieślik J, Skrzypkowski K, Brostow W. Evaluation of the Vibration Signal during Milling Vertical Thin-Walled Structures from Aerospace Materials. Sensors. 2023;23(14):6398. doi:10.3390/s23146398

BibTeX
@article{Kurpiel2023,
  author = {Kurpiel, Szymon and Zagórski, Krzysztof and Cieślik, Jacek and Skrzypkowski, Krzysztof and Brostow, Witold},
  title = {Evaluation of the Vibration Signal during Milling Vertical Thin-Walled Structures from Aerospace Materials},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {14},
  pages = {6398},
  doi = {10.3390/s23146398}
}
Kostenlos starten →