Evaluating Optical Clock Performance for GNSS Positioning
Sensors · 28.06.2023 · 23 (13) · 5998
DOI: 10.3390/s23135998 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Sensors, online erschienen am 28.06.2023. Verfasst von Enkhtuvshin Boldbaatar und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Science (Geospatial), RMIT University, Melbourne, VIC 3001, Australia. Hauptthemen laut MEDLINE: Industry, Spacecraft. Die Arbeit wurde bisher 28-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Atomic clocks are highly precise timing devices used in numerous Positioning, Navigation, and Timing (PNT) applications on the ground and in outer space. In recent years, however, more precise timing solutions based on optical technology have been introduced as current technology capabilities advance. State-of-the-art optical clocks—predicted to be the next level of their predecessor atomic clocks—have achieved ultimate uncertainty of 1 × 10−18 and beyond, which exceeds the best atomic clock’s performance by two orders of magnitude. Hence, the successful development of optical clocks has drawn significant attention in academia and industry to exploit many more opportunities. This paper first provides an overview of the emerging optical clock technology, its current development, and characteristics, followed by a clock stability analysis of some of the successfully developed optical clocks against current Global Navigation Satellite System (GNSS) satellite clocks to discuss the optical clock potentiality in GNSS positioning. The overlapping Allan Deviation (ADEV) method is applied to estimate the satellite clock stability from International GNSS Service (IGS) clock products, whereas the optical clock details are sourced from the existing literature. The findings are (a) the optical clocks are more stable than that of atomic clocks onboard GNSS satellites, though they may require further technological maturity to meet spacecraft payload requirements, and (b) in GNSS positioning, optical clocks could potentially offer less than a 1 mm range error (clock-related) in 30 s and at least 10 times better timing performance after 900 s in contrast to the Galileo satellite atomic clocks—which is determined in this study as the most stable GNSS atomic clock type used in satellite positioning.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Science (Geospatial), RMIT University, Melbourne, VIC 3001, Australia.
ORCID-Profile: Enkhtuvshin Boldbaatar, Donald Grant, Safoora Zaminpardaz
Zitieren
APA
Boldbaatar, E., Grant, D., Choy, S., Zaminpardaz, S., & Holden, L. (2023). Evaluating Optical Clock Performance for GNSS Positioning. Sensors, 23(13), 5998. https://doi.org/10.3390/s23135998
Vancouver
Boldbaatar E, Grant D, Choy S, Zaminpardaz S, Holden L. Evaluating Optical Clock Performance for GNSS Positioning. Sensors. 2023;23(13):5998. doi:10.3390/s23135998
BibTeX
@article{Boldbaatar2023,
author = {Boldbaatar, Enkhtuvshin and Grant, Donald and Choy, Suelynn and Zaminpardaz, Safoora and Holden, Lucas},
title = {Evaluating Optical Clock Performance for GNSS Positioning},
journal = {Sensors},
year = {2023},
volume = {23},
number = {13},
pages = {5998},
doi = {10.3390/s23135998}
}
EUVIMED