Measurement of Magnetic and Magnetostrictive Characteristics of Transformer Core Based on Triaxial Strain Gauge and B-H Vector Sensor
Sensors · 2023
DOI: 10.3390/s23135926 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, 2023. Verfasst von Zhen Wang und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Electrical Engineering, Shenyang University of Technology, Shenyang 110870, China. Hauptthemen laut MEDLINE: Electric Power Supplies, Electricity. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Educational Department of Liaoning Province, Education Department of Liaoning Province, China.
Abstract (Originalsprache)
As is well known, the magnetostrictive phenomenon of electrical steel sheet is the main source of electricity in equipment such as transformers. The magnetostrictive characteristic of the actual transformer core is more complicated than that of single-sheet steel. The magnetostriction phenomenon of the transformer core cannot be fully understood by studying only a single piece of electrical steel, so it is necessary to study the local magnetic characteristics of the transformer directly. In this paper, two-limb, one-phase transformer core with a multi-step-lap construction was assembled, a laminated magnetostrictive testing system based on triaxial strain gauges was built, and the local magnetic characteristics were studied using a self-developed B-H vector sensor. The magnetostrictive and magnetic properties in different local regions were measured and analyzed under several magnetization patterns, and the influence of DC bias on the magnetostrictive property of the corner, yoke, and limb of the core was investigated. The influence of the position of the clamp on the magnetostriction of the transformer core was also studied. The magnetostrictive strain of the single sheet and laminated core was compared and discussed. The results showed that the strain caused by the interaction between laminations in this area can be effectively reduced when clamping in the middle of the yoke.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- School of Electrical Engineering, Shenyang University of Technology, Shenyang 110870, China.
- Shenyang Railway Prospecting Design Institute Co., Ltd., Building Electrification Institute, Shenyang 110000, China.
Förderung
- Educational Department of Liaoning Province
- Education Department of Liaoning Province, China
Zitieren
APA
Wang, Z., Fan, Z., Li, X., Xu, K., & Yu, R. (2023). Measurement of Magnetic and Magnetostrictive Characteristics of Transformer Core Based on Triaxial Strain Gauge and B-H Vector Sensor. Sensors. https://doi.org/10.3390/s23135926
Vancouver
Wang Z, Fan Z, Li X, Xu K, Yu R. Measurement of Magnetic and Magnetostrictive Characteristics of Transformer Core Based on Triaxial Strain Gauge and B-H Vector Sensor. Sensors. 2023. doi:10.3390/s23135926
BibTeX
@article{Wang2023,
author = {Wang, Zhen and Fan, Zheming and Li, Xiang and Xu, Kai and Yu, Runjie},
title = {Measurement of Magnetic and Magnetostrictive Characteristics of Transformer Core Based on Triaxial Strain Gauge and B-H Vector Sensor},
journal = {Sensors},
year = {2023},
doi = {10.3390/s23135926}
}
EUVIMED