EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Surface Decarburization Depth Detection in Rods of 60Si2Mn Steel with Magnetic Barkhausen Noise Technique

Peng Li iD, Xianxian Wang, Dongdong Ding, Zhaoxiang Gao, Wen Fang, Chaolei Zhang iD, Cunfu He, Xiucheng Liu iD

Sensors · 2023

DOI: 10.3390/s23010503 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, 2023. Verfasst von Peng Li und 7 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Information Technology, Beijing University of Technology, Beijing 100124, China. Hauptthemen laut MEDLINE: Magnets, Steel. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key R&D Program of China, National Natural Science Foundation of China, National Key R&D Program of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Magnetic Barkhausen noise (MBN), sensitive to the microstructure of materials, can be applied in the surface decarburization depth detection of ferromagnetic specimens. However, the effects of core microstructures on the determination results of decarburization depth have not been explored. In this study, MBN was employed to evaluate the magnetic properties of the decarburized 60Si2Mn spring steels with martensitic and pearlitic core microstructures. Spring steel samples were austenitized at different times to generate different decarburization depths. Seven magnetic features were extracted from the MBN butterfly profiles. We used the variation coefficient, linear correlation coefficient, and normalized sensitivity to discuss the influence of the core microstructures on these seven features. The different core microstructures led to a large difference in the ability of MBN features to characterize the decarburization layer depth. However, three features of MBN butterfly profiles demonstrated an approximately linear dependency (linear correlation coefficient > 94%) on surface decarburization depth and monotonically increased with the increase in depth in both core microstructures of spring steels.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

MagnetsSteelPhysical PhenomenaSeasonsMagnetic Phenomena

Stichwörter der Autor:innen

core microstructuremagnetic Barkhausen noisespring steelsurface decarburization depth

Substanzen

Steel

Autor:innen und Institutionen

  • Faculty of Information Technology, Beijing University of Technology, Beijing 100124, China.
  • School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China.

ORCID-Profile: Peng Li, Chaolei Zhang, Xiucheng Liu

Förderung

  • National Key R&D Program of China
  • National Natural Science Foundation of China
  • National Key R&D Program of China

Zitieren

APA

Li, P., Wang, X., Ding, D., Gao, Z., Fang, W., Zhang, C., He, C., & Liu, X. (2023). Surface Decarburization Depth Detection in Rods of 60Si2Mn Steel with Magnetic Barkhausen Noise Technique. Sensors. https://doi.org/10.3390/s23010503

Vancouver

Li P, Wang X, Ding D, Gao Z, Fang W, Zhang C, et al. Surface Decarburization Depth Detection in Rods of 60Si2Mn Steel with Magnetic Barkhausen Noise Technique. Sensors. 2023. doi:10.3390/s23010503

BibTeX
@article{Li2023,
  author = {Li, Peng and Wang, Xianxian and Ding, Dongdong and Gao, Zhaoxiang and Fang, Wen and Zhang, Chaolei and He, Cunfu and Liu, Xiucheng},
  title = {Surface Decarburization Depth Detection in Rods of 60Si2Mn Steel with Magnetic Barkhausen Noise Technique},
  journal = {Sensors},
  year = {2023},
  doi = {10.3390/s23010503}
}
Kostenlos starten →