EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Temperature-to-Frequency Converter-Based On-Chip Temperature Sensor with an Inaccuracy of +0.65 °C/−0.49 °C

Zicong Xu, Xuan Zhang, Sili Chen, Jiahao Cheong, Lei Yao

Sensors · 2023

DOI: 10.3390/s23115169 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, 2023. Verfasst von Zicong Xu und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Microelectronics, Shanghai University, Shanghai 201800, China. Hauptthemen laut MEDLINE: Electric Power Supplies. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key R&D Program of China, National Key R&D Program of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper proposes a temperature sensor based on temperature-frequency conversion using 180 nm CMOS technology. The temperature sensor consists of a proportional-to-absolute temperature (PTAT) current generating circuit, a relaxation oscillator with oscillation frequency proportional to temperature (OSC-PTAT), a relaxation oscillator with oscillation frequency independent of temperature (OSC-CON), and a divider circuit cascaded with D flip-flops. Using BJT as the temperature sensing module, the sensor has the advantages of high accuracy and high resolution. An oscillator that uses PTAT current to charge and discharge capacitors to achieve oscillation, and utilizes voltage average feedback (VAF) to enhance the frequency stability of the oscillator is tested. Through the dual temperature sensing process with the same structure, the influence of variables such as power supply voltage, device, and process deviation can be reduced to a certain extent. The temperature sensor in this paper was implemented and tested with a temperature measurement range of 0–100 °C, an inaccuracy of +0.65 °C/−0.49 °C after two-point calibration, a resolution of 0.003 °C, a resolution Figure of Merit (FOM) of 6.7 pJ/K2, an area of 0.059 mm2, and a power consumption of 32.9 μW.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Electric Power SuppliesTemperatureEquipment DesignFeedbackCalibration

Stichwörter der Autor:innen

frequency dividerrelaxation oscillatortemperature sensortwo-point calibration

Autor:innen und Institutionen

  • School of Microelectronics, Shanghai University, Shanghai 201800, China.
  • The Shanghai Industrial μTechnology Research Institute, Shanghai 201899, China.

Förderung

  • National Key R&D Program of China
  • National Key R&D Program of China

Zitieren

APA

Xu, Z., Zhang, X., Chen, S., Cheong, J., & Yao, L. (2023). A Temperature-to-Frequency Converter-Based On-Chip Temperature Sensor with an Inaccuracy of +0.65 °C/−0.49 °C. Sensors. https://doi.org/10.3390/s23115169

Vancouver

Xu Z, Zhang X, Chen S, Cheong J, Yao L. A Temperature-to-Frequency Converter-Based On-Chip Temperature Sensor with an Inaccuracy of +0.65 °C/−0.49 °C. Sensors. 2023. doi:10.3390/s23115169

BibTeX
@article{Xu2023,
  author = {Xu, Zicong and Zhang, Xuan and Chen, Sili and Cheong, Jiahao and Yao, Lei},
  title = {A Temperature-to-Frequency Converter-Based On-Chip Temperature Sensor with an Inaccuracy of +0.65 °C/−0.49 °C},
  journal = {Sensors},
  year = {2023},
  doi = {10.3390/s23115169}
}
Kostenlos starten →