Review of Zinc Oxide Piezoelectric Nanogenerators: Piezoelectric Properties, Composite Structures and Power Output
Sensors · 10.04.2023 · 23 (8) · 3859
DOI: 10.3390/s23083859 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Sensors, online erschienen am 10.04.2023. Verfasst von Neelesh Bhadwal und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical and Industrial Engineering, University of Toronto, Toronto, ON M5S 3G8, Canada. Die Arbeit wurde bisher 177-mal zitiert (Crossref) und nennt 110 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science and Engineering Research Council (NSERC) of Canada.
Abstract (Originalsprache)
Lead-containing piezoelectric materials typically show the highest energy conversion efficiencies, but due to their toxicity they will be limited in future applications. In their bulk form, the piezoelectric properties of lead-free piezoelectric materials are significantly lower than lead-containing materials. However, the piezoelectric properties of lead-free piezoelectric materials at the nano scale can be significantly larger than the bulk scale. This review looks at the suitability of ZnO nanostructures as candidate lead-free piezoelectric materials for use in piezoelectric nanogenerators (PENGs) based on their piezoelectric properties. Of the papers reviewed, Neodymium-doped ZnO nanorods (NRs) have a comparable piezoelectric strain constant to bulk lead-based piezoelectric materials and hence are good candidates for PENGs. Piezoelectric energy harvesters typically have low power outputs and an improvement in their power density is needed. This review systematically reviews the different composite structures of ZnO PENGs to determine the effect of composite structure on power output. State-of-the-art techniques to increase the power output of PENGs are presented. Of the PENGs reviewed, the highest power output belonged to a vertically aligned ZnO nanowire (NWs) PENG (1-3 nanowire composite) with a power output of 45.87 μW/cm2 under finger tapping. Future directions of research and challenges are discussed.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechanical and Industrial Engineering, University of Toronto, Toronto, ON M5S 3G8, Canada.
ORCID-Profile: Kamran Behdinan
Förderung
- National Science and Engineering Research Council (NSERC) of Canada
Zitieren
APA
Bhadwal, N., Ben Mrad, R., & Behdinan, K. (2023). Review of Zinc Oxide Piezoelectric Nanogenerators: Piezoelectric Properties, Composite Structures and Power Output. Sensors, 23(8), 3859. https://doi.org/10.3390/s23083859
Vancouver
Bhadwal N, Ben Mrad R, Behdinan K. Review of Zinc Oxide Piezoelectric Nanogenerators: Piezoelectric Properties, Composite Structures and Power Output. Sensors. 2023;23(8):3859. doi:10.3390/s23083859
BibTeX
@article{Bhadwal2023,
author = {Bhadwal, Neelesh and Ben Mrad, Ridha and Behdinan, Kamran},
title = {Review of Zinc Oxide Piezoelectric Nanogenerators: Piezoelectric Properties, Composite Structures and Power Output},
journal = {Sensors},
year = {2023},
volume = {23},
number = {8},
pages = {3859},
doi = {10.3390/s23083859}
}
EUVIMED