EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Piezoelectric Nanogenerators Fabricated Using Spin Coating of Poly(vinylidene fluoride) and ZnO Composite

Md Jahirul Islam iD, Hyeji Lee, Kihak Lee, Chanseob Cho, Bonghwan Kim iD

Nanomaterials · 06.04.2023 · 13 (7) · 1289

DOI: 10.3390/nano13071289 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 06.04.2023. Verfasst von Md Jahirul Islam und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Semiconductor Electronic Engineering, Daegu Catholic University, Gyeongsan 38430, Republic of Korea. Die Arbeit wurde bisher 37-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea (NRF).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this context, the open-circuit voltage generated by either poly (vinylidene fluoride) or PVDF and ZnO composite sample before being enhanced to 4.2 V compared to 1.2 V for the samples of pure PVDF. The spin coating method was used to create a composite film, which served as a piezoelectric nanogenerator (PNG). Zinc oxide (ZnO) nanoparticles and PVDF serve as the matrix for the coating structure. Thin films were created that employed the spin coating method to achieve the desired results of ZnO’s non-brittle outcome and piezoelectric characteristics, as well as PVDF for use in self-powered devices. Scanning electron microscopy (SEM), X-ray diffraction (XRD), and fourier transform infrared (FT-IR) were used to evaluate the properties of these formations. The electrical properties of the film were measured using an oscilloscope. Results indicated that by adding ZnO nanoparticles to the PVDF samples, piezoelectric capabilities were enhanced compared to samples containing PVDF only. These results point to promising uses for various wearable devices, such as water strider robot systems and self-operating equipment.

Schlagwörter

Stichwörter der Autor:innen

nanogeneratorpiezoelectricspin coating

Autor:innen und Institutionen

  • Department of Semiconductor Electronic Engineering, Daegu Catholic University, Gyeongsan 38430, Republic of Korea.
  • School of Electronics Engineering, Kyungpook National University, Daegu 41566, Republic of Korea.

ORCID-Profile: Md Jahirul Islam, Bonghwan Kim

Förderung

  • National Research Foundation of Korea (NRF)

Zitieren

APA

Islam, M. J., Lee, H., Lee, K., Cho, C., & Kim, B. (2023). Piezoelectric Nanogenerators Fabricated Using Spin Coating of Poly(vinylidene fluoride) and ZnO Composite. Nanomaterials, 13(7), 1289. https://doi.org/10.3390/nano13071289

Vancouver

Islam MJ, Lee H, Lee K, Cho C, Kim B. Piezoelectric Nanogenerators Fabricated Using Spin Coating of Poly(vinylidene fluoride) and ZnO Composite. Nanomaterials. 2023;13(7):1289. doi:10.3390/nano13071289

BibTeX
@article{Islam2023,
  author = {Islam, Md Jahirul and Lee, Hyeji and Lee, Kihak and Cho, Chanseob and Kim, Bonghwan},
  title = {Piezoelectric Nanogenerators Fabricated Using Spin Coating of Poly(vinylidene fluoride) and ZnO Composite},
  journal = {Nanomaterials},
  year = {2023},
  volume = {13},
  number = {7},
  pages = {1289},
  doi = {10.3390/nano13071289}
}
Kostenlos starten →