EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Tube Model Predictive Control Method for Autonomous Lateral Vehicle Control Based on Sliding Mode Control

Yong Dai iD, Duo Wang iD

Sensors · 09.04.2023 · 23 (8) · 3844

DOI: 10.3390/s23083844 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 09.04.2023. Verfasst von Yong Dai und 1 weiteren Autor:innen. Beteiligte Einrichtung: School of Automation and Electrical Engineering, Shenyang Ligong University, Shenyang 110159, China. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: 2021 High-Level Talents Research Support Program of Shenyang Ligong University, Scientific Research Fund of Liaoning Provincial Education Department, 2021 HighBlevel Talents Research Support Program of Shenyang Ligong University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper aims to enhance the lateral path tracking control of autonomous vehicles (AV) in the presence of external disturbances. While AV technology has made significant strides, real-world driving scenarios often pose challenges such as slippery or uneven roads, which can adversely affect the lateral path tracking control and reduce driving safety and efficiency. Conventional control algorithms struggle to address this issue due to their inability to account for unmodeled uncertainties and external disturbances. To tackle this problem, this paper proposes a novel algorithm that combines robust sliding mode control (SMC) and tube model predictive control (MPC). The proposed algorithm leverages the strengths of both MPC and SMC. Specifically, MPC is used to derive the control law for the nominal system to track the desired trajectory. The error system is then employed to minimize the difference between the actual state and the nominal state. Finally, the sliding surface and reaching law of SMC are utilized to derive an auxiliary tube SMC control law, which helps the actual system keep up with the nominal system and achieve robustness. Experimental results demonstrate that the proposed method outperforms conventional tube MPC, linear quadratic regulator (LQR) algorithms, and MPC in terms of robustness and tracking accuracy, especially in the presence of unmodeled uncertainties and external disturbances.

Schlagwörter

Stichwörter der Autor:innen

autonomous vehicle (AV)model predictive control (MPC)path trackingsliding mode control (SMC)tube MPC

Autor:innen und Institutionen

  • School of Automation and Electrical Engineering, Shenyang Ligong University, Shenyang 110159, China.
  • Science and Technology Development Corporation, Shenyang Ligong University, Shenyang 110003, China.

ORCID-Profile: Yong Dai, Duo Wang

Förderung

  • 2021 High-Level Talents Research Support Program of Shenyang Ligong University
  • Scientific Research Fund of Liaoning Provincial Education Department
  • 2021 HighBlevel Talents Research Support Program of Shenyang Ligong University

Zitieren

APA

Dai, Y., & Wang, D. (2023). A Tube Model Predictive Control Method for Autonomous Lateral Vehicle Control Based on Sliding Mode Control. Sensors, 23(8), 3844. https://doi.org/10.3390/s23083844

Vancouver

Dai Y, Wang D. A Tube Model Predictive Control Method for Autonomous Lateral Vehicle Control Based on Sliding Mode Control. Sensors. 2023;23(8):3844. doi:10.3390/s23083844

BibTeX
@article{Dai2023,
  author = {Dai, Yong and Wang, Duo},
  title = {A Tube Model Predictive Control Method for Autonomous Lateral Vehicle Control Based on Sliding Mode Control},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {8},
  pages = {3844},
  doi = {10.3390/s23083844}
}
Kostenlos starten →