Sliding Mode Speed Control for PMSM Based on Model Predictive Current
Electronics · 29.06.2024 · 13 (13) · 2561
DOI: 10.3390/electronics13132561 ↗Kurz gefasst
Fachartikel in der Zeitschrift Electronics, online erschienen am 29.06.2024. Verfasst von Weihong Zhou und 4 weiteren Autor:innen. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Project of China, National Natural Science Foundation of China.
Abstract (Originalsprache)
To enhance the dynamic performance and disturbance rejection capability of the permanent magnet synchronous motor speed control system, a novel speed control method based on a novel sliding mode control (NSMC) and load torque observer is proposed on the basis of model predictive current control (MPCC) with a sliding mode disturbance observer. First, on the basis of MPCC, the influence of parameters such as resistance, inductance, and flux linkage on MPCC is analyzed. To address the aggregated disturbance caused by parameter mismatches, a piecewise square-root switching function sliding mode disturbance observer (SMDO) is designed to enhance the robustness of the parameters. To address the poor dynamic performance and inadequate robustness resulting from the proportional-integral-controller (PI) velocity loop control in the MPCC, a novel NSMC velocity control method is proposed. This method utilizes the hyperbolic sine function and fractional-order integral sliding mode surface, resolving the dilemma faced by traditional slide mode controllers (SMC) in balancing fast response and reduced vibration. Additionally, to enhance the system’s disturbance rejection capability, a sliding mode torque observer (SMTO) is designed to continuously update the observed load torque value into the NSMC controller, achieving speed compensation control. Finally, through comparative experiments among the proportional integral controller (PI), SMC, NSMC, and NSMC + SMTO, the results indicate that the proposed NSMC + SMTO exhibits the best speed response, steady-state characteristics, and disturbance rejection capability.
Förderung
- National Key Research and Development Project of China
- National Natural Science Foundation of China
Zitieren
APA
Zhou, W., Song, Z., Xiao, X., Guo, Y., & Mo, Y. (2024). Sliding Mode Speed Control for PMSM Based on Model Predictive Current. Electronics, 13(13), 2561. https://doi.org/10.3390/electronics13132561
Vancouver
Zhou W, Song Z, Xiao X, Guo Y, Mo Y. Sliding Mode Speed Control for PMSM Based on Model Predictive Current. Electronics. 2024;13(13):2561. doi:10.3390/electronics13132561
BibTeX
@article{Zhou2024,
author = {Zhou, Weihong and Song, Zhe and Xiao, Xi and Guo, Yougui and Mo, Yu},
title = {Sliding Mode Speed Control for PMSM Based on Model Predictive Current},
journal = {Electronics},
year = {2024},
volume = {13},
number = {13},
pages = {2561},
doi = {10.3390/electronics13132561}
}
EUVIMED