EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Ultrasonic Transducers for In-Service Inspection and Continuous Monitoring in High-Temperature Environments

Sevan Bouchy iD, Ricardo J Zednik iD, Pierre Belanger iD

Sensors · 28.03.2023 · 23 (7) · 3520

DOI: 10.3390/s23073520 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 28.03.2023. Verfasst von Sevan Bouchy und 2 weiteren Autor:innen. Beteiligte Einrichtung: PULETS, École de Technologie Supérieure (ÉTS), Montréal, QC H3C 1K3, Canada. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Sciences and Engineering Research Council, Mitacs, Canadian National Science and Engineering Research Council (NSERC).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The inspection of structures operating at high temperatures is a major challenge in a variety of industries, including the energy and petrochemical industries. Operators are typically performing nondestructive evaluations using ultrasound to monitor component thicknesses during scheduled shutdowns, thereby ensuring safe operation of their plants. However, despite being costly, this calendar-based approach may lead to undetected corrosion, which can potentially result in catastrophic failures. There is therefore a need for ultrasonic transducers designed to withstand permanent exposure to high temperatures, so as to continuously monitor the remnant thicknesses of structures in real time. This paper discusses the design of a heat-resistant ultrasonic transducer based on a piezoelectric element. The piezoelectric material, the electrodes, the backing layer, the wires and the casing are presented in detail from the acoustic and thermal expansion point of view. Four transducers optimized for 3 MHz were manufactured and tested to destruction in different conditions: (1) 72-h temperature steps from room temperature to 750 ∘C, (2) thermal cycles from room temperature to 500 ∘C and (3) 60 days of continuous operation at >550 ∘C. The paper discusses the results, as well as the effect of temperature over time on the properties of the transducer.

Schlagwörter

Stichwörter der Autor:innen

bulk acoustic wave sensorscontinuous inspectionhigh temperaturein-service inspectionnondestructive evaluationpiezoelectrictransducerultrasonic sensorsultrasound

Autor:innen und Institutionen

  • PULETS, École de Technologie Supérieure (ÉTS), Montréal, QC H3C 1K3, Canada.
  • Department of Mechanical Engineering, École de Technologie Supérieure (ÉTS), Montréal, QC H3C 1K3, Canada.

ORCID-Profile: Sevan Bouchy, Ricardo J Zednik, Pierre Belanger

Förderung

  • Natural Sciences and Engineering Research Council
  • Mitacs
  • Canadian National Science and Engineering Research Council (NSERC)
  • École de Technologie Supérieure

Zitieren

APA

Bouchy, S., Zednik, R. J., & Belanger, P. (2023). Ultrasonic Transducers for In-Service Inspection and Continuous Monitoring in High-Temperature Environments. Sensors, 23(7), 3520. https://doi.org/10.3390/s23073520

Vancouver

Bouchy S, Zednik RJ, Belanger P. Ultrasonic Transducers for In-Service Inspection and Continuous Monitoring in High-Temperature Environments. Sensors. 2023;23(7):3520. doi:10.3390/s23073520

BibTeX
@article{Bouchy2023,
  author = {Bouchy, Sevan and Zednik, Ricardo J and Belanger, Pierre},
  title = {Ultrasonic Transducers for In-Service Inspection and Continuous Monitoring in High-Temperature Environments},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {7},
  pages = {3520},
  doi = {10.3390/s23073520}
}
Kostenlos starten →