EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Crack Monitoring in Rotating Shaft Using Rotational Speed Sensor-Based Torsional Stiffness Estimation with Adaptive Extended Kalman Filters

Young-Hun Park, Hee-Beom Lee, Gi-Woo Kim iD

Sensors · 22.02.2023 · 23 (5) · 2437

DOI: 10.3390/s23052437 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 22.02.2023. Verfasst von Young-Hun Park und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Inha University, Incheon 22212, Republic of Korea. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Inha University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, we present an alternative solution for detecting crack damages in rotating shafts under torque fluctuation by directly estimating the reduction in torsional shaft stiffness using the adaptive extended Kalman filter (AEKF) algorithm. A dynamic system model of a rotating shaft for designing AEKF was derived and implemented. An AEKF with a forgetting factor (λ) update was then designed to effectively estimate the time-varying parameter (torsional shaft stiffness) owing to cracks. Both simulation and experimental results demonstrated that the proposed estimation method could not only estimate the decrease in stiffness caused by a crack, but also quantitatively evaluate the fatigue crack growth by directly estimating the shaft torsional stiffness. Another advantage of the proposed approach is that it uses only two cost-effective rotational speed sensors and can be readily implemented in structural health monitoring systems of rotating machinery.

Schlagwörter

Stichwörter der Autor:innen

adaptive extended Kalman filtercrack monitoringforgetting factor updaterotating shaftrotational speed sensorstorsional stiffness estimation

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Inha University, Incheon 22212, Republic of Korea.

ORCID-Profile: Gi-Woo Kim

Förderung

  • Inha University

Zitieren

APA

Park, Y. H., Lee, H. B., & Kim, G. W. (2023). Crack Monitoring in Rotating Shaft Using Rotational Speed Sensor-Based Torsional Stiffness Estimation with Adaptive Extended Kalman Filters. Sensors, 23(5), 2437. https://doi.org/10.3390/s23052437

Vancouver

Park YH, Lee HB, Kim GW. Crack Monitoring in Rotating Shaft Using Rotational Speed Sensor-Based Torsional Stiffness Estimation with Adaptive Extended Kalman Filters. Sensors. 2023;23(5):2437. doi:10.3390/s23052437

BibTeX
@article{Park2023,
  author = {Park, Young-Hun and Lee, Hee-Beom and Kim, Gi-Woo},
  title = {Crack Monitoring in Rotating Shaft Using Rotational Speed Sensor-Based Torsional Stiffness Estimation with Adaptive Extended Kalman Filters},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {5},
  pages = {2437},
  doi = {10.3390/s23052437}
}
Kostenlos starten →