EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Research on Multi-Sensor Fusion Localization for Forklift AGV Based on Adaptive Weight Extended Kalman Filter

Qiang Wang, Junqi Wu, Yinghua Liao, Bo Huang, Hang Li, Jiajun Zhou

Sensors · 11.09.2025 · 25 (18) · 5670

DOI: 10.3390/s25185670 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 11.09.2025. Verfasst von Qiang Wang und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Sichuan University of Science and Engineering, Zigong 643000, China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Sichuan Province Central Guided Local Science and Technology Development Special Project, 2024 Yibin Science and Technology Achievement Transfer and Transformation Guidance Programme Projects, Sichuan University of Science and Engineering Innovation and Entrepreneurship Training Program Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study addresses the problem localization deviation caused by cumulative wheel odometry errors in Automated Guided Vehicles (AGVs) operating in complex environments by proposing an adaptive localization method based on multi-sensor fusion. Within an Extended Kalman Filter (EKF) framework, the proposed approach integrates internal sensor predictions with external positioning data corrections, employing an adaptive weighting algorithm to dynamically adjust the contributions of different sensors. This effectively suppresses errors induced by factors such as ground friction and uneven terrain. The experimental results demonstrate that the method achieves a localization accuracy of 13 mm, and the simulation results show a higher accuracy of 10 mm under idealized conditions. The minor discrepancy is attributed to unmodeled noise and systematic errors in the complex real-world environment, thus validating the robustness of the proposed approach while maintaining robustness against challenges such as Non-Line-of-Sight (NLOS) obstructions and low-light conditions. The synergistic combination of LiDAR and odometry not only ensures data accuracy but also enhances system stability, providing a reliable navigation solution for AGVs in industrial settings.

Schlagwörter

Stichwörter der Autor:innen

Extended Kalman Filteradaptive localizationautomated guided vehiclesmulti-sensor fusion

Autor:innen und Institutionen

  • School of Mechanical Engineering, Sichuan University of Science and Engineering, Zigong 643000, China.

Förderung

  • Sichuan Province Central Guided Local Science and Technology Development Special Project
  • 2024 Yibin Science and Technology Achievement Transfer and Transformation Guidance Programme Projects
  • Sichuan University of Science and Engineering Innovation and Entrepreneurship Training Program Project

Zitieren

APA

Wang, Q., Wu, J., Liao, Y., Huang, B., Li, H., & Zhou, J. (2025). Research on Multi-Sensor Fusion Localization for Forklift AGV Based on Adaptive Weight Extended Kalman Filter. Sensors, 25(18), 5670. https://doi.org/10.3390/s25185670

Vancouver

Wang Q, Wu J, Liao Y, Huang B, Li H, Zhou J. Research on Multi-Sensor Fusion Localization for Forklift AGV Based on Adaptive Weight Extended Kalman Filter. Sensors. 2025;25(18):5670. doi:10.3390/s25185670

BibTeX
@article{Wang2025,
  author = {Wang, Qiang and Wu, Junqi and Liao, Yinghua and Huang, Bo and Li, Hang and Zhou, Jiajun},
  title = {Research on Multi-Sensor Fusion Localization for Forklift AGV Based on Adaptive Weight Extended Kalman Filter},
  journal = {Sensors},
  year = {2025},
  volume = {25},
  number = {18},
  pages = {5670},
  doi = {10.3390/s25185670}
}
Kostenlos starten →