EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design of MIR Dispersive Spectrograph System with Uncooled Microbolometer

Pattarapong Sunongbua, Suwan Aekram, Weerasak Lertsiriyothin

Sensors · 15.02.2023 · 23 (4) · 2205

DOI: 10.3390/s23042205 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 15.02.2023. Verfasst von Pattarapong Sunongbua und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Agricultural Engineering, Institute of Engineering, Suranaree University of Technology, Nakhon Ratchasima 30000, Thailand. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Research and Innovation Fund (NSRF) under Thailand Science Research and Innovation (TSRI), Agricultural Research Development Agency, National Science, Research, and Innovation Fund (NSRF).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To make the mid-infrared (MIR) dispersive spectrograph a practical tool in industrial food processing lines, we designed a dispersive spectrograph system with an uncooled microbolometer focal plane array (FPA) detector for MIR spectral acquisition. To precisely regulate the angle of a rotatable grating to acquire the MIR spectrum, the spectral resolution and spatial resolution of the system were rigorously controlled to improve system performance. In the reflectance operation mode of the MIR dispersive spectrograph, the uncooled microbolometer FPA detector offered a maximum spectral resolution of 12 nm for the MIR, when a 300 grooves/mm blazed grating was used. Utilizing an optical parametric oscillator (OPO) pulse laser source, the wavelengths of the first-order diffraction were validated, and the system’s spectral resolution limit was determined. As a line-scanning source, a Globar broadband source was installed, and the USAF 1951 Resolution Calculator was used to establish the spatial resolution of the imaging spectrograph. Using NI LabView, the logical operational technique for controlling the MIR dispersive spectrograph was encoded into system firmware. The GUI and test results are thoroughly described.

Schlagwörter

Stichwörter der Autor:innen

diffraction gratingmicrobolometermid-infrared spectrograph

Autor:innen und Institutionen

  • School of Agricultural Engineering, Institute of Engineering, Suranaree University of Technology, Nakhon Ratchasima 30000, Thailand.

Förderung

  • National Science Research and Innovation Fund (NSRF) under Thailand Science Research and Innovation (TSRI)
  • Agricultural Research Development Agency
  • National Science, Research, and Innovation Fund (NSRF)

Zitieren

APA

Sunongbua, P., Aekram, S., & Lertsiriyothin, W. (2023). Design of MIR Dispersive Spectrograph System with Uncooled Microbolometer. Sensors, 23(4), 2205. https://doi.org/10.3390/s23042205

Vancouver

Sunongbua P, Aekram S, Lertsiriyothin W. Design of MIR Dispersive Spectrograph System with Uncooled Microbolometer. Sensors. 2023;23(4):2205. doi:10.3390/s23042205

BibTeX
@article{Sunongbua2023,
  author = {Sunongbua, Pattarapong and Aekram, Suwan and Lertsiriyothin, Weerasak},
  title = {Design of MIR Dispersive Spectrograph System with Uncooled Microbolometer},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {4},
  pages = {2205},
  doi = {10.3390/s23042205}
}
Kostenlos starten →