EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Very Compact Waveguide Orthomode Transducer in the K-Band for Broadband Communication Satellite Array Antennas

Nelson J G Fonseca iD

Sensors · 09.01.2023 · 23 (2) · 735

DOI: 10.3390/s23020735 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 09.01.2023. Verfasst von Nelson J G Fonseca. Beteiligte Einrichtung: Antenna and Sub-Millimetre Waves Section, European Space Agency, 2201 AZ Noordwijk, The Netherlands. Hauptthemen laut MEDLINE: Commerce, Refraction, Ocular. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A very compact waveguide orthomode transducer (OMT) is described in this paper. The design is characterized with a twofold rotationally symmetric cross-section in the probing area, adapted from a side-coupling OMT design, simultaneously enabling low port-to-port coupling and high cross-polarization discrimination (XPD) over a fractional bandwidth of about 15–20%. Compared to previously reported compact waveguide OMTs, the proposed design is simpler, thus facilitating its manufacture at millimeter-wave frequencies. The concept is demonstrated with a design in the K-band for a broadband communication satellite downlink over the frequency band of 17.3–20.2 GHz. For test purposes, transitions to standard waveguide WR42 are included, and the OMT is assembled with a conical horn antenna. The measured reflection and coupling coefficients are below −19.5 dB and −22.9 dB, respectively, over the nominal bandwidth, and they are in good agreement with the simulation’s results. The on-axis XPD, measured in an anechoic chamber, is better than 30 dB over the nominal bandwidth, which is also in line with simulations. The proposed waveguide OMT may be designed to fit in a lattice below one wavelength at the highest operating frequency, which is desirable for dual-polarized closely spaced array antennas in low and medium Earth orbit communication satellite systems. The simple mechanical design of the proposed OMT makes it particularly appealing for additive manufacturing techniques, as demonstrated with a variant of the design having folded single-mode waveguides, which preserves the RF properties of the original design.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

CommerceRefraction, OcularSatellite CommunicationsTransducers

Stichwörter der Autor:innen

broadband communication satellitedual-polarized phased array antennaorthomode transducerpassive waveguide component

Autor:innen und Institutionen

  • Antenna and Sub-Millimetre Waves Section, European Space Agency, 2201 AZ Noordwijk, The Netherlands.

ORCID-Profile: Nelson J G Fonseca

Zitieren

APA

Fonseca, N. J. G. (2023). Very Compact Waveguide Orthomode Transducer in the K-Band for Broadband Communication Satellite Array Antennas. Sensors, 23(2), 735. https://doi.org/10.3390/s23020735

Vancouver

Fonseca NJG. Very Compact Waveguide Orthomode Transducer in the K-Band for Broadband Communication Satellite Array Antennas. Sensors. 2023;23(2):735. doi:10.3390/s23020735

BibTeX
@article{Fonseca2023,
  author = {Fonseca, Nelson J G},
  title = {Very Compact Waveguide Orthomode Transducer in the K-Band for Broadband Communication Satellite Array Antennas},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {2},
  pages = {735},
  doi = {10.3390/s23020735}
}
Kostenlos starten →