EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Simple Way to Reduce 3D Model Deformation in Smartphone Photogrammetry

Aleksandra Jasińska iD, Krystian Pyka, Elżbieta Pastucha iD, Henrik Skov Midtiby iD

Sensors · 09.01.2023 · 23 (2) · 728

DOI: 10.3390/s23020728 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 09.01.2023. Verfasst von Aleksandra Jasińska und 3 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Geo-Data Science, Geodesy, and Environmental Engineering, AGH University of Science and Technology, al. Mickiewicza 30, 30-059 Cracow, Pol…. Hauptthemen laut MEDLINE: Smartphone, Photogrammetry. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 105 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: AGH University of Science and Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Recently, the term smartphone photogrammetry gained popularity. This suggests that photogrammetry may become a simple measurement tool by virtually every smartphone user. The research was undertaken to clarify whether it is appropriate to use the Structure from Motion—Multi Stereo View (SfM-MVS) procedure with self-calibration as it is done in Uncrewed Aerial Vehicle photogrammetry. First, the geometric stability of smartphone cameras was tested. Fourteen smartphones were calibrated on the checkerboard test field. The process was repeated multiple times. These observations were found: (1) most smartphone cameras have lower stability of the internal orientation parameters than a Digital Single-Lens Reflex (DSLR) camera, and (2) the principal distance and position of the principal point are constantly changing. Then, based on images from two selected smartphones, 3D models of a small sculpture were developed. The SfM-MVS method was used, with self-calibration and pre-calibration variants. By comparing the resultant models with the reference DSLR-created model it was shown that introducing calibration obtained in the test field instead of self-calibration improves the geometry of 3D models. In particular, deformations of local concavities and convexities decreased. In conclusion, there is real potential in smartphone photogrammetry, but it also has its limits.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

SmartphonePhotogrammetryCalibration

Stichwörter der Autor:innen

3D reconstructioncamera calibrationphotogrammetrysmartphonestructure from motion

Autor:innen und Institutionen

  • Faculty of Geo-Data Science, Geodesy, and Environmental Engineering, AGH University of Science and Technology, al. Mickiewicza 30, 30-059 Cracow, Poland.
  • UAS Center, The Maersk Mc-Kinney Moller Institute, University of Southern Denmark, Campusvey 55, 5230 Odense, Denmark.

ORCID-Profile: Aleksandra Jasińska, Elżbieta Pastucha, Henrik Skov Midtiby

Förderung

  • AGH University of Science and Technology

Zitieren

APA

Jasińska, A., Pyka, K., Pastucha, E., & Midtiby, H. S. (2023). A Simple Way to Reduce 3D Model Deformation in Smartphone Photogrammetry. Sensors, 23(2), 728. https://doi.org/10.3390/s23020728

Vancouver

Jasińska A, Pyka K, Pastucha E, Midtiby HS. A Simple Way to Reduce 3D Model Deformation in Smartphone Photogrammetry. Sensors. 2023;23(2):728. doi:10.3390/s23020728

BibTeX
@article{Jasiska2023,
  author = {Jasińska, Aleksandra and Pyka, Krystian and Pastucha, Elżbieta and Midtiby, Henrik Skov},
  title = {A Simple Way to Reduce 3D Model Deformation in Smartphone Photogrammetry},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {2},
  pages = {728},
  doi = {10.3390/s23020728}
}
Kostenlos starten →