Robotized 3D Scanning and Alignment Method for Dimensional Qualification of Big Parts Printed by Material Extrusion
Robotics · 10.12.2024 · 13 (12) · 175
DOI: 10.3390/robotics13120175 ↗Kurz gefasst
Fachartikel in der Zeitschrift Robotics, online erschienen am 10.12.2024. Verfasst von Juan Carlos Antolin-Urbaneja und 3 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: EIT Manufacturing.
Abstract (Originalsprache)
Moulds for aeronautical applications must fulfil highly demanding requirements, including the geometrical tolerances before and after curing cycles at high temperatures and pressures. The growing availability of thermoplastic materials printed by material extrusion systems requires research to verify the geometrical accuracy after three-dimensional printing processes to assess whether the part can meet the required geometry through milling processes. In this sense, the application of automated techniques to assess quick and reliable measurements is an open point under this promising technology. This work investigates the integration of a 3D vision system using a structured-light 3D scanner, placed onto an industrial robot in an eye-in-hand configuration and synchronized by a computer. The complete system validates an in-house algorithm, which inspects the whole reconstructed part, acquiring several views from different poses, and makes the alignment with the theoretical model of the geometry of big parts manufactured by 3D printing. Moreover, the automation of the validation process for the manufactured parts using contactless detection of the offset-printed material can be used to define milling strategies to achieve the geometric qualifications. The algorithm was tested using several parts printed by the material extrusion of a thermoplastic material based on black polyamide 6 reinforced with short carbon fibres. The complete inspection process was performed in 38 s in the three studied cases. The results assure that more than 95.50% of the evaluated points of each reconstructed point cloud differed by more than one millimetre from the theoretical model.
Förderung
- EIT Manufacturing
Zitieren
APA
Antolin-Urbaneja, J. C., Goñi, R. P., Olaizola, N. A., & Pizarro, A. I. L. (2024). Robotized 3D Scanning and Alignment Method for Dimensional Qualification of Big Parts Printed by Material Extrusion. Robotics, 13(12), 175. https://doi.org/10.3390/robotics13120175
Vancouver
Antolin-Urbaneja JC, Goñi RP, Olaizola NA, Pizarro AIL. Robotized 3D Scanning and Alignment Method for Dimensional Qualification of Big Parts Printed by Material Extrusion. Robotics. 2024;13(12):175. doi:10.3390/robotics13120175
BibTeX
@article{AntolinUrbaneja2024,
author = {Antolin-Urbaneja, Juan Carlos and Goñi, Rakel Pacheco and Olaizola, Nerea Alberdi and Pizarro, Ana Isabel Luengo},
title = {Robotized 3D Scanning and Alignment Method for Dimensional Qualification of Big Parts Printed by Material Extrusion},
journal = {Robotics},
year = {2024},
volume = {13},
number = {12},
pages = {175},
doi = {10.3390/robotics13120175}
}
EUVIMED