EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Binder-Level Rheological Evaluation of Virgin HDPE, LDPE, and PP as Asphalt Binder Modifiers: Baseline Assessment for Plastic Waste Recycling Applications

Nafisa Tarannum, Shahjalal Selim, Nazimuddin M. Wasiuddin, Andrew Peters

Recycling · 06.08.2026 · 11 (8) · 138

DOI: 10.3390/recycling11080138 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Recycling, online erschienen am 06.08.2026. Verfasst von Nafisa Tarannum und 3 weiteren Autor:innen. Die Arbeit nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Federal Highway Administration.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Increasing plastic waste and limited recycling rates underscore the need for value-added recycling applications. Polymers commonly present in plastic waste streams, including packaging films, bottles, caps, and rigid containers, may provide a practical pathway for developing plastic-modified asphalt binder (PMAB) systems. In this study, virgin high-density polyethylene (HDPE), low-density polyethylene (LDPE), and polypropylene (PP) were selected as reference modifiers to evaluate their intrinsic effects on performance grade (PG) 58-28 and PG 67-22 base binders. Conventional high-, intermediate-, and low-temperature gradings were complemented by ΔTc, the Christensen–Anderson R-value (R-value), the Glover–Rowe (G-R) parameter, Linear Amplitude Sweep (LAS) fatigue analysis modeled via Viscoelastic Continuum Damage (VECD), rheological master curves, and extended Bending Beam Rheometer (BBR) testing. Modification improved high-temperature grading and LAS-based fatigue response while increasing master-curve stiffness. However, ΔTc, G-R parameter, and extended BBR results indicated increased low-temperature cracking susceptibility. High-temperature grades increased by 3.4 °C, 2.8 °C, and 2.3 °C per percent HDPE, LDPE, and PP, respectively, whereas low-temperature grade losses reached 7.8 °C; HDPE produced the highest high-temperature grade improvement, while LDPE showed the greatest extended BBR grade loss, and PP exhibited the fastest physical hardening rate. These results provide a controlled binder-level baseline for evaluating HDPE, LDPE, and PP as modifiers for future PMAB development.

Förderung

  • Federal Highway Administration

Zitieren

APA

Tarannum, N., Selim, S., Wasiuddin, N. M., & Peters, A. (2026). Binder-Level Rheological Evaluation of Virgin HDPE, LDPE, and PP as Asphalt Binder Modifiers: Baseline Assessment for Plastic Waste Recycling Applications. Recycling, 11(8), 138. https://doi.org/10.3390/recycling11080138

Vancouver

Tarannum N, Selim S, Wasiuddin NM, Peters A. Binder-Level Rheological Evaluation of Virgin HDPE, LDPE, and PP as Asphalt Binder Modifiers: Baseline Assessment for Plastic Waste Recycling Applications. Recycling. 2026;11(8):138. doi:10.3390/recycling11080138

BibTeX
@article{Tarannum2026,
  author = {Tarannum, Nafisa and Selim, Shahjalal and Wasiuddin, Nazimuddin M. and Peters, Andrew},
  title = {Binder-Level Rheological Evaluation of Virgin HDPE, LDPE, and PP as Asphalt Binder Modifiers: Baseline Assessment for Plastic Waste Recycling Applications},
  journal = {Recycling},
  year = {2026},
  volume = {11},
  number = {8},
  pages = {138},
  doi = {10.3390/recycling11080138}
}
Kostenlos starten →