EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Rheological Behavior of Oleic Acid–Iron Mineral Suspensions for Steel Rolling Oily Sludge: Effects of Mineral Type, Volume Fraction, and Particle Size

Zhigang Que, Haifang Li, Jinming Shi, Xianbin Ai, Haiwei Jiang, Fan Gu, Tonghui Deng, Yinxuan Fu, Xiaodi Cheng, Rong Huang

Processes · 07.11.2026 · 14 (21) · 3606

DOI: 10.3390/pr14213606 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 07.11.2026. Verfasst von Zhigang Que und 9 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: China Baowu Low-Carbon Metallurgy Innovation Foundation, National Natural Science Foundation of China, Jiangxi Provincial Natural Science Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The apparent viscosity of the oil–solid interface in steel rolling oily sludge (SROS) is governed by the amount, identity, and size of solid particles. To decouple these factors, oleic acid was used as a model oil phase, and Fe, Fe3O4, and Fe2O3 were selected as representative iron-bearing minerals. The effects of mineral type, Fe3O4 volume fraction, and particle size on the rheological behavior of oleic acid–mineral suspensions were systematically investigated using a rotational rheometer. Pure oleic acid behaved as a Newtonian fluid (24.96 mPa·s), and all suspensions exhibited near-Newtonian behavior with flow indices close to unity (0.959–1.048) and small yield stresses; no shear thickening was observed. At a matched loading of 4 vol%, the apparent viscosity followed the order Fe3O4 > Fe > Fe2O3. Notably, the Fe2O3 system exhibited a viscosity almost identical to that of neat oleic acid, which indicates that the reactivity of the mineral surface towards the carboxyl group of oleic acid, and the resulting aggregation state, dictate the particle–oil coupling, rather than the degree of oxidation. Furthermore, the apparent viscosity increased monotonically with Fe3O4 volume fraction (2–6 vol%) and decreased with increasing particle size (Dv(50) = 13.3–29.2 μm). Interestingly, the yield stress was highest for the coarsest powder, revealing that the static network strength and steady-flow viscosity are controlled by different microstructural features. These findings provide a quantitative basis for interpreting the oil–solid contribution to the viscosity of iron-bearing sludges and for developing targeted viscosity-reduction strategies.

Förderung

  • China Baowu Low-Carbon Metallurgy Innovation Foundation
  • National Natural Science Foundation of China
  • Jiangxi Provincial Natural Science Foundation
  • Key R&D Program of Jiangxi Province
  • Pilot Demonstration Project for the Contract Responsibility System of the Provincial Science and Technology Plan Project of Jiangxi Academy of Sciences

Zitieren

APA

Que, Z., Li, H., Shi, J., Ai, X., Jiang, H., Gu, F., Deng, T., Fu, Y., Cheng, X., & Huang, R. (2026). Rheological Behavior of Oleic Acid–Iron Mineral Suspensions for Steel Rolling Oily Sludge: Effects of Mineral Type, Volume Fraction, and Particle Size. Processes, 14(21), 3606. https://doi.org/10.3390/pr14213606

Vancouver

Que Z, Li H, Shi J, Ai X, Jiang H, Gu F, et al. Rheological Behavior of Oleic Acid–Iron Mineral Suspensions for Steel Rolling Oily Sludge: Effects of Mineral Type, Volume Fraction, and Particle Size. Processes. 2026;14(21):3606. doi:10.3390/pr14213606

BibTeX
@article{Que2026,
  author = {Que, Zhigang and Li, Haifang and Shi, Jinming and Ai, Xianbin and Jiang, Haiwei and Gu, Fan and Deng, Tonghui and Fu, Yinxuan and Cheng, Xiaodi and Huang, Rong},
  title = {Rheological Behavior of Oleic Acid–Iron Mineral Suspensions for Steel Rolling Oily Sludge: Effects of Mineral Type, Volume Fraction, and Particle Size},
  journal = {Processes},
  year = {2026},
  volume = {14},
  number = {21},
  pages = {3606},
  doi = {10.3390/pr14213606}
}
Infokarte | EUVIMED

Artikeldaten derzeit nicht verfügbar.

Recherche