EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Characteristic Analysis of High-Pressure Common-Rail Injector Nozzles

Jikang Xu, Yuqi Chang, Zhaoyue Liu, Hailong Ji, Ruichuan Li, Ning Zhang, Jiang Li

Processes · 26.07.2026 · 14 (15) · 2406

DOI: 10.3390/pr14152406 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 26.07.2026. Verfasst von Jikang Xu und 6 weiteren Autor:innen. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shandong Provincial Key Research and Development Program, Shandong Provincial Pilot Project for Integrated R&D, Manufacturing, Promotion and Application of Agricultural Machinery, Anhui Provincial Pilot Project for Integrated R&D, Manufacturing, Promotion and Application of Agricultural Machinery.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates an SAC-type injector nozzle used in a diesel high-pressure common-rail fuel-injection system. The mixture multiphase-flow model, RNG k-ε turbulence model, and Schnerr–Sauer cavitation model were employed to compare the internal flow characteristics of circular and elliptical nozzle orifices under different operating and geometric parameters. The results show that, as the inlet pressure increased from 110 to 170 MPa, the outlet velocity and mass flow rate of the elliptical orifice reached 495.80 m/s and 27.28 g/s, respectively, while the outlet vapor volume fraction increased to 0.161. As the outlet back pressure increased from 5 to 20 MPa, the outlet vapor volume fraction of the elliptical orifice was 41.32–46.49% lower than that of the circular orifice, whereas its mass flow rate was 4.84–23.54% higher. The geometric-parameter analysis indicated that superior internal flow performance was obtained at a nozzle-orifice angle of 75° and an inlet rounding radius of 0.03 mm. The converging elliptical orifice increased the outlet velocity and mass flow rate by 18.3% and 23.29%, respectively. These results demonstrate that the converging elliptical orifice can effectively mitigate flow separation and cavitation while improving outlet-flow uniformity and fuel-delivery performance.

Förderung

  • Shandong Provincial Key Research and Development Program
  • Shandong Provincial Pilot Project for Integrated R&D, Manufacturing, Promotion and Application of Agricultural Machinery
  • Anhui Provincial Pilot Project for Integrated R&D, Manufacturing, Promotion and Application of Agricultural Machinery

Zitieren

APA

Xu, J., Chang, Y., Liu, Z., Ji, H., Li, R., Zhang, N., & Li, J. (2026). Characteristic Analysis of High-Pressure Common-Rail Injector Nozzles. Processes, 14(15), 2406. https://doi.org/10.3390/pr14152406

Vancouver

Xu J, Chang Y, Liu Z, Ji H, Li R, Zhang N, et al. Characteristic Analysis of High-Pressure Common-Rail Injector Nozzles. Processes. 2026;14(15):2406. doi:10.3390/pr14152406

BibTeX
@article{Xu2026,
  author = {Xu, Jikang and Chang, Yuqi and Liu, Zhaoyue and Ji, Hailong and Li, Ruichuan and Zhang, Ning and Li, Jiang},
  title = {Characteristic Analysis of High-Pressure Common-Rail Injector Nozzles},
  journal = {Processes},
  year = {2026},
  volume = {14},
  number = {15},
  pages = {2406},
  doi = {10.3390/pr14152406}
}
Kostenlos starten →