EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Engineering design and performance validation of a low-cost diesel common rail injector test bench

Wedhar Adi Wiratama, Zainal Arifin, Sudarwanto, Ware-Ebi Guwor-Niki Jesse

Journal of Automotive and Mechanical Applied Technology · 27.06.2026 · 34-42

DOI: 10.21831/jamat.v3i1.3028 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Automotive and Mechanical Applied Technology, online erschienen am 27.06.2026. Verfasst von Wedhar Adi Wiratama und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High-pressure common rail (HPCR) systems are essential in modern diesel engines to meet performance and emissions requirements. However, commercial injector test benches remain costly for vocational laboratories and small-scale workshops. This study designs, develops, and preliminarily validates a low-cost diesel common rail injector test bench using the ADDIE (analysis, design, development, implementation, and evaluation) framework. The system integrates a repurposed Chevrolet Captiva high-pressure supply pump driven by a 1 hp AC motor, a high-pressure fuel circuit, and an Arduino Nano-based electronic control unit (ECU) that applies pulse-width modulation (PWM) to control pulsed injector actuation. Validation was performed using a Denso Hino RN285 injector at low, medium, and high operating stages. The bench generated rail pressures from 360 bar (36 MPa) to 850 bar (85 MPa) and delivered 18.0 to 39.0 mL of fuel over a 20 s collection window. The measured delivery volume at low and medium speeds remained within the manufacturer’s tolerance after interpolation to the actual measured rpm. In contrast, a delivery deficit was observed at the highest speed. Quantitative spray-image analysis yielded spray angles of 15.38-20.44 degrees, within the specified range. The results indicate that the developed bench is a functional laboratory-scale platform for injector diagnostics and vocational training, although further benchmarking against calibrated commercial equipment and long-term durability testing are still required.

Zitieren

APA

Wiratama, W. A., Arifin, Z., Sudarwanto, & Jesse, W. G. (2026). Engineering design and performance validation of a low-cost diesel common rail injector test bench. Journal of Automotive and Mechanical Applied Technology, 34-42. https://doi.org/10.21831/jamat.v3i1.3028

Vancouver

Wiratama WA, Arifin Z, Sudarwanto, Jesse WG. Engineering design and performance validation of a low-cost diesel common rail injector test bench. Journal of Automotive and Mechanical Applied Technology. 2026:34-42. doi:10.21831/jamat.v3i1.3028

BibTeX
@article{Wiratama2026,
  author = {Wiratama, Wedhar Adi and Arifin, Zainal and Sudarwanto and Jesse, Ware-Ebi Guwor-Niki},
  title = {Engineering design and performance validation of a low-cost diesel common rail injector test bench},
  journal = {Journal of Automotive and Mechanical Applied Technology},
  year = {2026},
  pages = {34--42},
  doi = {10.21831/jamat.v3i1.3028}
}
Kostenlos starten →