EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Preparation and Performance Evaluation of a Core–Shell Nanosilica-Based Plugging Agent for High-Temperature Oil-Based Drilling Fluids

Bo Zhao, Wei’an Huang, Junyi Liu

Processes · 27.06.2026 · 14 (13) · 2097

DOI: 10.3390/pr14132097 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 27.06.2026. Verfasst von Bo Zhao und 2 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Maintaining wellbore stability in deep and ultra-deep formations demands plugging agents capable of sealing nano- to micro-scale pores under high-temperature conditions. A core–shell nano-plugging agent (CSP) was synthesized via emulsion polymerization using KH-570-modified nano-SiO2 as the rigid core and a poly(styrene-co-butyl acrylate-co-methyl methacrylate) terpolymer as the deformable shell. CSP particles had a mean diameter of 196.5 nm (polydispersity index, PDI = 0.183) and an onset decomposition temperature of 342 °C. Compatibility tests at 180 °C confirmed that 3 wt% CSP caused no adverse changes in the rheology or emulsion stability of the oil-based drilling fluid (OBM). At 180 °C, CSP reduced the high-temperature high-pressure (HTHP) filtrate loss by 64.4% and the permeability plugging apparatus (PPA) filtrate loss by 66.1%. Sand-disk tests elevated the breakthrough pressure from 1.5 to 9.2 MPa. Core displacement on sandstone cores achieved a plugging rate of 98.30%, and pressure transmission tests on natural shale cores extended the 50% equalization time by 7.8-fold. Comparative evaluation confirmed that the core–shell architecture consistently outperformed nano-SiO2 alone, polymer alone, and their physical blend. Low-temperature N2 adsorption provided direct evidence of pore sealing, with the treated-shale Brunauer–Emmett–Teller (BET) surface area and total pore volume reduced by about 62% (12.6 to 4.8 m2/g and 0.0325 to 0.0121 cm3/g, respectively). Scanning electron microscopy of the shale surface before and after treatment further provided direct visual evidence of pore sealing, showing the open, porous matrix being converted into a dense, compacted filter cake. Filter-cake thickness measurements are consistent with a proposed three-stage plugging mechanism—bridging, deformation filling, and thermal compaction—driven by the complementary roles of the rigid core and the deformable shell. These findings indicate that CSP merits further evaluation as a high-temperature plugging agent for wellbore stabilization in deep shale formations.

Zitieren

APA

Zhao, B., Huang, W., & Liu, J. (2026). Preparation and Performance Evaluation of a Core–Shell Nanosilica-Based Plugging Agent for High-Temperature Oil-Based Drilling Fluids. Processes, 14(13), 2097. https://doi.org/10.3390/pr14132097

Vancouver

Zhao B, Huang W, Liu J. Preparation and Performance Evaluation of a Core–Shell Nanosilica-Based Plugging Agent for High-Temperature Oil-Based Drilling Fluids. Processes. 2026;14(13):2097. doi:10.3390/pr14132097

BibTeX
@article{Zhao2026,
  author = {Zhao, Bo and Huang, Wei’an and Liu, Junyi},
  title = {Preparation and Performance Evaluation of a Core–Shell Nanosilica-Based Plugging Agent for High-Temperature Oil-Based Drilling Fluids},
  journal = {Processes},
  year = {2026},
  volume = {14},
  number = {13},
  pages = {2097},
  doi = {10.3390/pr14132097}
}
Kostenlos starten →