EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Preparation and Characterization of Temperature-Sensitive Gel Plugging Agent

Fengbao Liu iD, Da Yin, Jinsheng Sun, Xiao Luo, Xianbin Huang iD

Gels · 15.11.2024 · 10 (11) · 742

DOI: 10.3390/gels10110742 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Gels, online erschienen am 15.11.2024. Verfasst von Fengbao Liu und 4 weiteren Autor:innen. Beteiligte Einrichtung: PetroChina Tarim Oilfield Company, Korla 841000, China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In order to use intelligent gel systems to realize deep source water control in medium and high water cut reservoirs, and also to solve the shortcomings of conventional gels, such as the high chemical dose required, large profile control radius, poor temperature resistance, shear resistance, and plugging performance, a temperature-sensitive gel based on natural cellulose was developed, and the temperature resistance, rheological performance, and plugging performance of the temperature-sensitive gel were tested and evaluated. The results show that the system can maintain a viscosity retention rate of up to 95% after high-temperature aging at 90–120 °C for 50 days. When using medium- to low-salinity calcium chloride formation water for preparation, the gelation effect is good. The rheometer oscillation frequency scanning test shows that the system gel is a strong elastic body dominated by elasticity. The core displacement experiment shows that the highest sealing rate of the system is 97%, and the breakthrough pressure can reach 2.5 MPa at this time. The microstructure of the gel system was tested by infrared, and it was found that the gel system had strong hydrogen bonding and the gel had good stability. The research results contribute to improving the recovery rate of high water cut oil reservoirs.

Schlagwörter

Stichwörter der Autor:innen

cellulose basedplugging propertypreparation and characterizationrheological propertytemperature-sensitive gel

Autor:innen und Institutionen

  • PetroChina Tarim Oilfield Company, Korla 841000, China.
  • CNPC Engineering Technology R&D Company Limited, Beijing 102206, China.
  • School of Petroleum Engineering, China University of Petroleum (East China), Qingdao 266580, China.
  • College of Chemical and Environmental Engineering, Yangtze University, Jingzhou 434000, China.

ORCID-Profile: Fengbao Liu, Xianbin Huang

Förderung

  • National Key Research and Development Program of China

Zitieren

APA

Liu, F., Yin, D., Sun, J., Luo, X., & Huang, X. (2024). Preparation and Characterization of Temperature-Sensitive Gel Plugging Agent. Gels, 10(11), 742. https://doi.org/10.3390/gels10110742

Vancouver

Liu F, Yin D, Sun J, Luo X, Huang X. Preparation and Characterization of Temperature-Sensitive Gel Plugging Agent. Gels. 2024;10(11):742. doi:10.3390/gels10110742

BibTeX
@article{Liu2024,
  author = {Liu, Fengbao and Yin, Da and Sun, Jinsheng and Luo, Xiao and Huang, Xianbin},
  title = {Preparation and Characterization of Temperature-Sensitive Gel Plugging Agent},
  journal = {Gels},
  year = {2024},
  volume = {10},
  number = {11},
  pages = {742},
  doi = {10.3390/gels10110742}
}
Kostenlos starten →