Analysis of Impact Rock-Breaking Characteristics and Temperature Field of PDC Cutter
Processes · 28.02.2026 · 14 (5) · 807
DOI: 10.3390/pr14050807 ↗Kurz gefasst
Fachartikel in der Zeitschrift Processes, online erschienen am 28.02.2026. Verfasst von Zebing Wu und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Hundred-Talent Program, the “Research on Intelligent Drilling Technology of Winch” project of Sinopec No. 4 Machinery Petroleum Machinery.
Abstract (Originalsprache)
Polycrystalline diamond compact (PDC) bits often experience localized heating during impact rock breaking in complex formations, resulting in reduced service life and lower drilling efficiency. An optimized structural design of PDC cutters can significantly enhance bit performance, mitigate thermal concentration, and extend operational longevity. Inspired by previous work on PDC cutter surface topography, five saw-type tooth-shaped cutter designs—featuring one to five saw-type teeth were developed. To evaluate their rock-breaking effectiveness and identify the optimum design, the impact-induced rock fragmentation processes of these cutters were compared using the finite element method. Key indicators, including cutting force, mechanical specific energy (MSE), and cutter surface temperature, were analyzed to determine the superior tooth configuration. Among the five designs, the four-saw-tooth cutter induced the most pronounced stress concentration in the rock. Its optimized number of saw-type teeth ensured full participation of all teeth in rock cutting, enabling efficient rock removal and maximizing breakage performance. Compared with other designs, this cutter exhibited the smallest fluctuations and mean cutting force. The specific mechanical energy decreased initially and then increased with the number of saw-type teeth, reaching a minimum for the four saw-type tooth design. Moreover, it showed the lowest surface temperature and the mildest temperature variation, which helps alleviate localized heating and improve wear resistance. The cutting performance of the four saw-type tooth was further influenced by cutting depth and back rake angle, with optimal values identified as 1.5 mm and 20°, respectively. Compared with a conventional cutter, the four saw-type tooth design reduced the overall surface temperature by approximately 10.69%, with temperature rise confined mainly to the grooves between adjacent saw-type teeth and no widespread thermal concentration observed, confirming its design superiority. Full-scale rock-breaking simulations demonstrated that the bit equipped with four saw-type tooth achieved greater penetration depth and required lower torque than the conventional design, indicating enhanced rock-breaking ability and higher drilling efficiency. In conclusion, the four saw-type tooth PDC cutter design offers a promising approach for developing high-performance drill bits and reducing drilling costs.
Förderung
- Hundred-Talent Program
- the “Research on Intelligent Drilling Technology of Winch” project of Sinopec No. 4 Machinery Petroleum Machinery
Zitieren
APA
Wu, Z., Zhang, Z., Lin, Y., Yan, Z., & Liu, K. (2026). Analysis of Impact Rock-Breaking Characteristics and Temperature Field of PDC Cutter. Processes, 14(5), 807. https://doi.org/10.3390/pr14050807
Vancouver
Wu Z, Zhang Z, Lin Y, Yan Z, Liu K. Analysis of Impact Rock-Breaking Characteristics and Temperature Field of PDC Cutter. Processes. 2026;14(5):807. doi:10.3390/pr14050807
BibTeX
@article{Wu2026,
author = {Wu, Zebing and Zhang, Zihao and Lin, Yifei and Yan, Zhe and Liu, Kenan},
title = {Analysis of Impact Rock-Breaking Characteristics and Temperature Field of PDC Cutter},
journal = {Processes},
year = {2026},
volume = {14},
number = {5},
pages = {807},
doi = {10.3390/pr14050807}
}
EUVIMED