Numerical Simulation Study on Rock-Breaking and Temperature Characteristics of Chisel PDC Cutter and Full-Bit Drilling
Processes · 12.06.2026 · 14 (12) · 1926
DOI: 10.3390/pr14121926 ↗Kurz gefasst
Fachartikel in der Zeitschrift Processes, online erschienen am 12.06.2026. Verfasst von Zebing Wu und 4 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Hundred-Talent Program, “Research on Intelligent Drilling Technology of Winch” project of Sinopec No. 4 Machinery Petroleum Machinery.
Abstract (Originalsprache)
Drilling in deep hard formations poses significant challenges for conventional polycrystalline diamond compact (PDC) cutters, which often suffer from low rock-breaking efficiency and premature failure due to severe cutter-face wear, high thermal loads, and stick-slip vibrations. To overcome these limitations, this study proposes a chisel-shaped PDC cutter and systematically investigates its rock-breaking and thermal characteristics. A coupled temperature–displacement finite element model (FEM) of cutter–granite interaction and a single-cutter indentation model were developed based on elastoplastic mechanics and the Drucker–Prager failure criterion. The rock constitutive parameters used in both models were validated through uniaxial compression tests. Using these models, the influences of cutter shape, back rake angle, and depth of cut (DOC) were analyzed. Compared with a conventional cylindrical cutter, the chisel cutter reduces the cutting force by 13.4% and the axial penetration reaction force by 22%. The cutting force of the chisel cutter remains consistently lower across all tested depths. The optimal back rake angle is 20–25°, and the optimal DOC is 1.5 mm. Full-bit simulations further demonstrate that the chisel-cutter bit creates a more concentrated bottomhole stress field, increases the rate of penetration (ROP) by 19.7%, reduces average torque by 11.34%, and produces smoother torque fluctuations, indicating higher drilling stability. Thermal analysis reveals that the chisel cutter exhibits lower and more stable cutter-face temperatures. Both simulation and experimental results confirm that the chisel design reduces the friction contact area between cuttings and the cutter face, thereby lowering temperature accumulation. Field drilling data corroborate the reliability of the conclusions. These findings provide guidance for the design of PDC bits intended for deep hard formations.
Förderung
- Hundred-Talent Program
- “Research on Intelligent Drilling Technology of Winch” project of Sinopec No. 4 Machinery Petroleum Machinery
Zitieren
APA
Wu, Z., Wang, T., Song, L., Yang, Y., & Wang, H. (2026). Numerical Simulation Study on Rock-Breaking and Temperature Characteristics of Chisel PDC Cutter and Full-Bit Drilling. Processes, 14(12), 1926. https://doi.org/10.3390/pr14121926
Vancouver
Wu Z, Wang T, Song L, Yang Y, Wang H. Numerical Simulation Study on Rock-Breaking and Temperature Characteristics of Chisel PDC Cutter and Full-Bit Drilling. Processes. 2026;14(12):1926. doi:10.3390/pr14121926
BibTeX
@article{Wu2026,
author = {Wu, Zebing and Wang, Tianci and Song, Lianghui and Yang, Yizhou and Wang, Hao},
title = {Numerical Simulation Study on Rock-Breaking and Temperature Characteristics of Chisel PDC Cutter and Full-Bit Drilling},
journal = {Processes},
year = {2026},
volume = {14},
number = {12},
pages = {1926},
doi = {10.3390/pr14121926}
}
EUVIMED