EUVIMEDObjevte EUVIMED
Open access · CC BY 4.0

Virtual Commissioning for Optimization of an Automated Brushless Stator Assembly Line

Florina Chiscop, Andrei Serban, Carmen-Cristiana Cazacu, Cicerone Laurentiu Popa, Costel Emil Cotet

Processes · 2025-11-24 · 13 (12) · 3793

DOI: 10.3390/pr13123793 ↗

At a glance

Journal article in Processes, published online on 2025-11-24. Written by Florina Chiscop and 4 co-authors. Cited 2 times so far (Crossref); 38 references. The full text is freely available (open access, CC BY 4.0).

AbstraktBibliografické údajeCiteRelated studies

Abstract (original language)

This study applies to a virtual commissioning (VC) workflow with discrete-event simulation in WITNESS Horizon to diagnose and improve an automated brushless stator assembly line. A validated model of the full route—Stator Assembly Machine (SAM), Linear Transport System (LTS), Winding Machine (WM), Terminal Welding Machine (TWM), Inspection Machine (IM) and Electric Tester (ET)—was executed over a one-shift horizon (28,800 s). We compared the baseline configuration with an optimized scenario that retrieved robot tasks and refined LTS routing. Key performance indicators (KPIs) were resource utilization (Busy/Idle/Blocked) and completed operations. The results are quantitative and specific. Blocking at the SAM interface collapsed from 73.32% to 0% at PressPosition and from 80.64% to 0% at Robot2. LTS transitioned from 97.46% Blocked to 0%, with the share of Move/Running increasing to 14.76% (from ~0%). Line output—measured as completed assemblies at SAM—increased from 368 to 425 units per shift (+15.5%). Similar gains were recorded at other stations (e.g., WM1: 351 → 424 operations, +20.8%). These changes reflect the removal of the primary transfer bottleneck and a more balanced utilization across stations. The study demonstrates that VC can deliver actionable commissioning guidance. By quantifying where blocking occurs and testing alternative control strategies in a virtual environment, it is possible to raise throughput while maintaining stable operation. The modeling approach and metrics are reusable for related electromechanical assembly lines.

Cite

APA

Chiscop, F., Serban, A., Cazacu, C., Popa, C. L., & Cotet, C. E. (2025). Virtual Commissioning for Optimization of an Automated Brushless Stator Assembly Line. Processes, 13(12), 3793. https://doi.org/10.3390/pr13123793

Vancouver

Chiscop F, Serban A, Cazacu C, Popa CL, Cotet CE. Virtual Commissioning for Optimization of an Automated Brushless Stator Assembly Line. Processes. 2025;13(12):3793. doi:10.3390/pr13123793

BibTeX
@article{Chiscop2025,
  author = {Chiscop, Florina and Serban, Andrei and Cazacu, Carmen-Cristiana and Popa, Cicerone Laurentiu and Cotet, Costel Emil},
  title = {Virtual Commissioning for Optimization of an Automated Brushless Stator Assembly Line},
  journal = {Processes},
  year = {2025},
  volume = {13},
  number = {12},
  pages = {3793},
  doi = {10.3390/pr13123793}
}
Start for free →