Research on Strength of Bilateral Support Bearing of PDC–Cone Hybrid Bit
Processes · 19.09.2024 · 12 (9) · 2010
DOI: 10.3390/pr12092010 ↗Kurz gefasst
Fachartikel in der Zeitschrift Processes, online erschienen am 19.09.2024. Verfasst von Baxian Liu und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Industry Technology Research Institute of Intelligent Manufacturing, Sichuan University of Arts and Science, the open fund project of the State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation (Southwest Petroleum University), Nanchong City-Southwest Petroleum University City School Science and Technology Strategic Cooperation Project.
Abstract (Originalsprache)
The existing PDC (polycrystalline diamond compact)–cone hybrid bit bearing adopts a unilateral support structure, which is prone to stress concentration in the journal area, resulting in fracture and wear failure of the bearing, thus reducing the service life of the hybrid bit. In this paper, a new type of double supported bearing hybrid bit is proposed. The static strength analysis of unilateral and bilateral support bearing structures is carried out by finite element simulation, and the stress and strain distribution of the two structures under loads of 20–100 kN is obtained. Experimental devices for unilateral and bilateral support bearing structures are designed and manufactured to complete 50–100 kN static pressure loading experiments. The results show that the stress and strain of unilateral and bilateral support bearing increased linearly with the increase of load. Compared with unilateral bearing, when the load was 100 kN, the maximum Mises stress of bilateral bearing decreased from 358.80 MPa to 211.10 MPa, with a decrease of 41.16%. The maximum contact stress decreased from 415.20 MPa to 378.10 MPa, a decreased of 8.94%, and the maximum principal strain decreased from 1.101 × 10−3 to 9.71 × 10−4, a decrease of 11.81%. The axial strain in the danger zone was reduced by 14.68% and 17.35%, respectively. It is found that the contact stress of the simulation data is highly correlated with the bearing life, and the service life of the bilateral bearing bit is increased by 8.94%. The simulation data and experimental results provide data support for the production of hybrid bits with bilateral bearing support.
Förderung
- the Industry Technology Research Institute of Intelligent Manufacturing, Sichuan University of Arts and Science
- the open fund project of the State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation (Southwest Petroleum University)
- Nanchong City-Southwest Petroleum University City School Science and Technology Strategic Cooperation Project
Zitieren
APA
Liu, B., Yang, L., Pian, X., Xie, R., Chen, T., & Huang, K. (2024). Research on Strength of Bilateral Support Bearing of PDC–Cone Hybrid Bit. Processes, 12(9), 2010. https://doi.org/10.3390/pr12092010
Vancouver
Liu B, Yang L, Pian X, Xie R, Chen T, Huang K. Research on Strength of Bilateral Support Bearing of PDC–Cone Hybrid Bit. Processes. 2024;12(9):2010. doi:10.3390/pr12092010
BibTeX
@article{Liu2024,
author = {Liu, Baxian and Yang, Liyuan and Pian, Xiaoxuan and Xie, Rui and Chen, Ting and Huang, Kuilin},
title = {Research on Strength of Bilateral Support Bearing of PDC–Cone Hybrid Bit},
journal = {Processes},
year = {2024},
volume = {12},
number = {9},
pages = {2010},
doi = {10.3390/pr12092010}
}
EUVIMED