EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimization of Billet Tube Mold Designs for High-Speed Continuous Casting

Xiaokai Pang, Huirong Li, Jingqi Wang, Liguang Zhu, Ligen Sun

Processes · 04.12.2023 · 11 (12) · 3367

DOI: 10.3390/pr11123367 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 04.12.2023. Verfasst von Xiaokai Pang und 4 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Central Guiding Local Science and Technology Development Fund Projects, Natural Science Foundation-Steel and Iron Foundation of Hebei Province China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Endless rolling urgently requires an increase in the casting speed of continuous casting. For the continuous casting process of a high-casting-speed billet, the heat flux of the mold would be much higher, requiring a stronger cooling performance and longer mold life to match the high-speed casting. Mold material, thickness, and slot structure have a great influence on the casting speed. To design a more efficient billet casting mold, a three-dimensional thermal-stress-coupled analysis model of a 150 mm × 150 mm mold was established in this research to analyze the thermal state of a mold with high casting speed; in addition, the material, thickness, and water slot structure, which pertain to the mold cooling performance, were also studied. The results show that the billet mold of Cu-Ag with a thinner thickness and right-corner water slot is better in terms of casting speed. Regarding the material, the Cu-Ag mold has a higher thermal conductivity efficiency; its hot surface temperature is 4.89 °C lower, its equivalent stress is 7 MPa lower, and its longitudinal deformation is 0.0023% lower compared with the deoxidized phosphorus copper mold. Regarding the thickness, the thinner mold has a 60.76 °C lower hot surface temperature, its equivalent stress is 340 MPa lower, and its longitudinal deformation is 0.0443% lower compared with the thicker mold. For the water slot structure, the mold with the right-angled water slot has a 2.895 °C lower hot surface temperature, its equivalent stress is 37 MPa lower, and its longitudinal deformation is 0.0039% lower compared with the mold with a rounded-corner water slot.

Förderung

  • Central Guiding Local Science and Technology Development Fund Projects
  • Natural Science Foundation-Steel and Iron Foundation of Hebei Province China

Zitieren

APA

Pang, X., Li, H., Wang, J., Zhu, L., & Sun, L. (2023). Optimization of Billet Tube Mold Designs for High-Speed Continuous Casting. Processes, 11(12), 3367. https://doi.org/10.3390/pr11123367

Vancouver

Pang X, Li H, Wang J, Zhu L, Sun L. Optimization of Billet Tube Mold Designs for High-Speed Continuous Casting. Processes. 2023;11(12):3367. doi:10.3390/pr11123367

BibTeX
@article{Pang2023,
  author = {Pang, Xiaokai and Li, Huirong and Wang, Jingqi and Zhu, Liguang and Sun, Ligen},
  title = {Optimization of Billet Tube Mold Designs for High-Speed Continuous Casting},
  journal = {Processes},
  year = {2023},
  volume = {11},
  number = {12},
  pages = {3367},
  doi = {10.3390/pr11123367}
}
Kostenlos starten →