The Effect of Mold Structure and Cooling Parameters on Heat Transfer during Billet High-Speed Continuous Casting
Materials · 25.04.2023 · 16 (9) · 3361
DOI: 10.3390/ma16093361 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 25.04.2023. Verfasst von Sijie Wang und 5 weiteren Autor:innen. Beteiligte Einrichtung: Laboratory of Materials and Metallurgy, College of Materials Science and Engineering, Chongqing University, Chongqing 400044, China. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Mold structure and cooling parameters are significant factors that affect the heat transfer capacity of high-speed continuous casting molds of billets. Therefore, a three-dimensional fluid flow and heat transfer model of a 160 mm × 160 mm billet mold was established, and its accuracy was verified. Thereby, the characteristics of heat transfer and influences of mold structure and cooling parameters on heat transfer in the high-speed continuous casting billet mold region were revealed. It was found that extending the effective length of a mold is the most valuable method to improve its heat transfer capability and achieve high-speed continuous casting. The total heat and the shell thickness at a mold outlet increased by 19% and 9.21% on average with every 100 mm extension. Enlarging the fillet radius could enhance the uniformity of heat transfer in the mold. Considering the loss of material, the optimal fillet radius of the mold was determined to be R = 10 mm.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Laboratory of Materials and Metallurgy, College of Materials Science and Engineering, Chongqing University, Chongqing 400044, China.
ORCID-Profile: Huamei Duan, Mujun Long
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Wang, S., Xu, P., Zhou, Y., Duan, H., Chen, D., & Long, M. (2023). The Effect of Mold Structure and Cooling Parameters on Heat Transfer during Billet High-Speed Continuous Casting. Materials, 16(9), 3361. https://doi.org/10.3390/ma16093361
Vancouver
Wang S, Xu P, Zhou Y, Duan H, Chen D, Long M. The Effect of Mold Structure and Cooling Parameters on Heat Transfer during Billet High-Speed Continuous Casting. Materials. 2023;16(9):3361. doi:10.3390/ma16093361
BibTeX
@article{Wang2023,
author = {Wang, Sijie and Xu, Pei and Zhou, Yongzhi and Duan, Huamei and Chen, Dengfu and Long, Mujun},
title = {The Effect of Mold Structure and Cooling Parameters on Heat Transfer during Billet High-Speed Continuous Casting},
journal = {Materials},
year = {2023},
volume = {16},
number = {9},
pages = {3361},
doi = {10.3390/ma16093361}
}
EUVIMED