EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Development of an Induction Heating Process for a Jewelry Factory: Experiments and Multiphysics

Thodsaphon Jansaengsuk, Sorathorn Pattanapichai, Jatuporn Thongsri

Processes · 13.03.2023 · 11 (3) · 858

DOI: 10.3390/pr11030858 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 13.03.2023. Verfasst von Thodsaphon Jansaengsuk und 2 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: College of Advanced Manufacturing Innovation, King Mongkut’s Institute of Technology Ladkrabang.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This article reports a successful development of the induction heating process (IHP) in a jewelry factory based on experiments and multiphysics consisting of electromagnetic and thermal simulations. First, two experiments were set to measure essential parameters for result validation and multiphysics boundary condition settings. Then, the essential parameters were applied to multiphysics, and both simulation results revealed heat transfer, magnetic flux density (B) generated by the coil, and temperature (T) of the product. B and T were consistent with the experimental results and theory, confirming the reliability of the multiphysics and methodology. After that, all simulation results were analyzed to assess and optimize IHP in terms of the number of coil turns (N), positional placement of the product (P), and coil thickness (Th). Multiphysics revealed that the current operating condition with N = 3 is proper; however, the IHP can be improved more with coil and operating condition optimizations. Finally, completing the optimizations, decreasing 40% of Th with N = 6, and the same P, increased B on the product by 21.62%, leading to IHP efficacy enhancement. The research findings are the optimum coil model and methodology for developing the IHP, which were practically employed in the jewelry factory.

Förderung

  • College of Advanced Manufacturing Innovation, King Mongkut’s Institute of Technology Ladkrabang

Zitieren

APA

Jansaengsuk, T., Pattanapichai, S., & Thongsri, J. (2023). A Development of an Induction Heating Process for a Jewelry Factory: Experiments and Multiphysics. Processes, 11(3), 858. https://doi.org/10.3390/pr11030858

Vancouver

Jansaengsuk T, Pattanapichai S, Thongsri J. A Development of an Induction Heating Process for a Jewelry Factory: Experiments and Multiphysics. Processes. 2023;11(3):858. doi:10.3390/pr11030858

BibTeX
@article{Jansaengsuk2023,
  author = {Jansaengsuk, Thodsaphon and Pattanapichai, Sorathorn and Thongsri, Jatuporn},
  title = {A Development of an Induction Heating Process for a Jewelry Factory: Experiments and Multiphysics},
  journal = {Processes},
  year = {2023},
  volume = {11},
  number = {3},
  pages = {858},
  doi = {10.3390/pr11030858}
}
Kostenlos starten →