EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multiphysics Analysis Process of Front-End Process for Induction Hardening of 3D Structures to Predict Structural Deformation

Soonjae Hwang, Sarang Yi, Jongkyu Park, Seokmoo Hong

Applied Sciences · 24.02.2025 · 15 (5) · 2410

DOI: 10.3390/app15052410 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 24.02.2025. Verfasst von Soonjae Hwang und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Technology Innovation Program, the Ministry of Trade, Industry, and Energy (MOTIE, Korea), the Technology development Program of MSS.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The torsion beam, integral to rear suspension systems in vehicles, is a critical component where strength and durability must be prioritized in specific regions. To enhance the strength of these regions, induction hardening, a localized heat treatment method, is employed. However, the application of this treatment introduces distortion, which compromises the precision of welding between components and raises significant concerns about product quality and safety. To address these challenges, the present study introduces a front-end analysis process for induction hardening aimed at predicting distortion following heat treatment. A three-dimensional model of the product was utilized to simulate the front-end process of induction hardening. A coupled analysis of electrical and thermal fields was conducted to replicate the heating effect induced by coils during the heat treatment process. Additionally, a thermo-structural coupled analysis was performed to predict the distortion occurring during the cooling phase. A comparative analysis with actual product measurements demonstrated that the proposed method achieved a distortion displacement prediction accuracy of 98%, thereby validating the efficacy of the proposed analysis process.

Förderung

  • Technology Innovation Program
  • the Ministry of Trade, Industry, and Energy (MOTIE, Korea)
  • the Technology development Program of MSS
  • Regional Innovation Strategy (RIS)
  • the National Research Foundation of Korea (NRF)
  • the Ministry of Education (MOE)

Zitieren

APA

Hwang, S., Yi, S., Park, J., & Hong, S. (2025). Multiphysics Analysis Process of Front-End Process for Induction Hardening of 3D Structures to Predict Structural Deformation. Applied Sciences, 15(5), 2410. https://doi.org/10.3390/app15052410

Vancouver

Hwang S, Yi S, Park J, Hong S. Multiphysics Analysis Process of Front-End Process for Induction Hardening of 3D Structures to Predict Structural Deformation. Applied Sciences. 2025;15(5):2410. doi:10.3390/app15052410

BibTeX
@article{Hwang2025,
  author = {Hwang, Soonjae and Yi, Sarang and Park, Jongkyu and Hong, Seokmoo},
  title = {Multiphysics Analysis Process of Front-End Process for Induction Hardening of 3D Structures to Predict Structural Deformation},
  journal = {Applied Sciences},
  year = {2025},
  volume = {15},
  number = {5},
  pages = {2410},
  doi = {10.3390/app15052410}
}
Kostenlos starten →