EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Conductive MoO3–PEDOT:PSS Composite Layer in MoO3/Au/MoO3–PEDOT:PSS Multilayer Electrode in ITO-Free Organic Solar Cells

Md Maniruzzaman, Rahim Abdur, Md Abdul Kuddus Sheikh, Son Singh, Jaegab Lee

Processes · 16.02.2023 · 11 (2) · 594

DOI: 10.3390/pr11020594 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 16.02.2023. Verfasst von Md Maniruzzaman und 4 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Ministry of Science and ICT of the Republic of Korea.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The solution-processed and conductive MoO3–PEDOT:PSS (Mo–PPSS) composite layer in a MoO3/Au/MoO3–PEDOT:PSS (MoAu/Mo–PPSS) multilayer electrode in ITO-free organic solar cells (OSCs) was optimized in terms of electrical conductivity, interfacial contact quality, work function, and process wettability of the conductive composite thin film. The surface composition of the PEDOT:PSS film onto different electrodes was observed by using X-Ray Photoelectron Spectroscopy. The PEDOT:PSS-MoO3 composite protects the dissolution of individual MoO3 with PEDOT:PSS, which was confirmed by Auger Electron Spectroscopy. The UV-Visible spectroscopy showed that the photoactive layer of P3HT:PCBM absorbs in the wavelength range of 300–650 nm with the maximum absorption at 515 nm (2.40 eV). The device performance of 3.97% based on an MoAu/Mo–PPSS conductive composite electrode exhibited comparable enhancement and only 6% enhancement compared to an ITO-based electrode (3.91%). The enhancement of device efficiency was mainly due to relatively higher conductivity, a low work function of the conductive metal oxide-metal-metal oxide/polymer composite, and an enhancement of interfacial contact quality between the hole transport layer (HTL) and the mixed organic polymeric photoactive layer. These results indicate that the solution-processable Mo–PPSS conductive composite layer of the MoO3/Au multilayer electrode can replace the ITO-based electrode in the bulk of heterojunction organic photovoltaics (OPVs).

Förderung

  • the Ministry of Science and ICT of the Republic of Korea

Zitieren

APA

Maniruzzaman, M., Abdur, R., Sheikh, M. A. K., Singh, S., & Lee, J. (2023). Conductive MoO3–PEDOT:PSS Composite Layer in MoO3/Au/MoO3–PEDOT:PSS Multilayer Electrode in ITO-Free Organic Solar Cells. Processes, 11(2), 594. https://doi.org/10.3390/pr11020594

Vancouver

Maniruzzaman M, Abdur R, Sheikh MAK, Singh S, Lee J. Conductive MoO3–PEDOT:PSS Composite Layer in MoO3/Au/MoO3–PEDOT:PSS Multilayer Electrode in ITO-Free Organic Solar Cells. Processes. 2023;11(2):594. doi:10.3390/pr11020594

BibTeX
@article{Maniruzzaman2023,
  author = {Maniruzzaman, Md and Abdur, Rahim and Sheikh, Md Abdul Kuddus and Singh, Son and Lee, Jaegab},
  title = {Conductive MoO3–PEDOT:PSS Composite Layer in MoO3/Au/MoO3–PEDOT:PSS Multilayer Electrode in ITO-Free Organic Solar Cells},
  journal = {Processes},
  year = {2023},
  volume = {11},
  number = {2},
  pages = {594},
  doi = {10.3390/pr11020594}
}
Kostenlos starten →