Efficient Fully‐Sprayed Organic Solar Cells with Coffee‐Ring‐Free Photoactive Layer and Alloy Top‐Electrode
Advanced Materials Technologies · 2023-06 · 8 (11)
DOI: 10.1002/admt.202201921 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials Technologies, online erschienen am 20.03.2023. Verfasst von Kai Chang und 7 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 88 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Depositing all functional layers (including the top electrode) with spray methods is highly desirable and challenging for the eventual commercialization of organic solar cells (OSCs). This work addresses two key challenges toward fully‐sprayed OSCs: i) the printing of a high‐quality photoactive layer free of coffee rings and ii) the spray of the top electrode without the need of evaporation nor solvents. To eliminate coffee rings caused by individual droplets, the photoactive layer is deposited by electrospray on the cooled substrate. The reduced temperature slows down the solvent evaporation, promotes merging of individual droplets, and suppresses the formation of coffee rings. By optimizing the drying temperature, homogeneous films without coffee rings are obtained. The improved active‐layer morphology facilitates charge transport and reduces recombination. The device prepared by the coldplate‐assisted electrospray reaches a power conversion efficiency (PCE) of 17.13%. In addition, an alloy with the melting point of 62 °C is spray‐printed as the top electrode using an airbrush. The spray process is optimized by the trade‐off between the coverage rate and the film thickness. OSCs with the alloy electrode achieve the highest PCE of 16.26%. The fully‐sprayed OSCs exhibit PCEs up to 15.09%, demonstrating a viable route toward fully‐sprayed OSCs with high‐performance.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Chang, K., Yu, B., Liu, L., Fang, D., Zhao, X., Mi, B., Huang, W., & Deng, W. (2023). Efficient Fully‐Sprayed Organic Solar Cells with Coffee‐Ring‐Free Photoactive Layer and Alloy Top‐Electrode. Advanced Materials Technologies, 8(11). https://doi.org/10.1002/admt.202201921
Vancouver
Chang K, Yu B, Liu L, Fang D, Zhao X, Mi B, et al. Efficient Fully‐Sprayed Organic Solar Cells with Coffee‐Ring‐Free Photoactive Layer and Alloy Top‐Electrode. Advanced Materials Technologies. 2023;8(11). doi:10.1002/admt.202201921
BibTeX
@article{Chang2023,
author = {Chang, Kai and Yu, Boyang and Liu, Linna and Fang, Dong and Zhao, Xinyan and Mi, Baoxiu and Huang, Wei and Deng, Weiwei},
title = {Efficient Fully‐Sprayed Organic Solar Cells with Coffee‐Ring‐Free Photoactive Layer and Alloy Top‐Electrode},
journal = {Advanced Materials Technologies},
year = {2023},
volume = {8},
number = {11},
doi = {10.1002/admt.202201921}
}
EUVIMED