Optimized Process for Melt Pyrolysis of Methane to Produce Hydrogen and Carbon Black over Ni Foam/NaCl-KCl Catalyst
Processes · 23.01.2023 · 11 (2) · 360
DOI: 10.3390/pr11020360 ↗Kurz gefasst
Fachartikel in der Zeitschrift Processes, online erschienen am 23.01.2023. Verfasst von Mengying Liu und 6 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Special project for the central government to guide the development of local science and technology in Sichuan Province, National Natural Science Foundation of China, Sichuan Provincial International Cooperation Project.
Abstract (Originalsprache)
Methane pyrolysis transforming CH4 into hydrogen without a CO2 byproduct is a potential hydrogen production process under the net-zero emission target. The melt pyrolysis of methane is a technology that could simultaneously obtain hydrogen and carbon products. However, its catalytic activity and stability are still far from satisfactory. In this work, a new strategy for the melt pyrolysis of methane to hydrogen production was proposed using Ni foam and molten NaCl-KCl. The increase in the amount of Ni foam was found to enhance the methane conversion rate from 12.6% to 18%. The process was optimized by the different amounts of catalysts, the height of the Ni foam layer, and the filling method of Ni foam, indicating that the methane conversion rate of the string method could reach 19.2% at 900 °C with the designed aeration device. Furthermore, we observed that the addition of molten salt significantly alleviated the carbon deposition deactivation of the Ni foam and maintained its macrostructure during the reaction. The analysis of the carbon products revealed that carbon black could be obtained.
Förderung
- Special project for the central government to guide the development of local science and technology in Sichuan Province
- National Natural Science Foundation of China
- Sichuan Provincial International Cooperation Project
- Sichuan Provincial Key Research and Development Project
Zitieren
APA
Liu, M., Huang, Z., Zhou, Y., Zhan, J., Zhang, K., Yang, M., & Zhou, Y. (2023). Optimized Process for Melt Pyrolysis of Methane to Produce Hydrogen and Carbon Black over Ni Foam/NaCl-KCl Catalyst. Processes, 11(2), 360. https://doi.org/10.3390/pr11020360
Vancouver
Liu M, Huang Z, Zhou Y, Zhan J, Zhang K, Yang M, et al. Optimized Process for Melt Pyrolysis of Methane to Produce Hydrogen and Carbon Black over Ni Foam/NaCl-KCl Catalyst. Processes. 2023;11(2):360. doi:10.3390/pr11020360
BibTeX
@article{Liu2023,
author = {Liu, Mengying and Huang, Zeai and Zhou, Yunxiao and Zhan, Junjie and Zhang, Kuikui and Yang, Mingkai and Zhou, Ying},
title = {Optimized Process for Melt Pyrolysis of Methane to Produce Hydrogen and Carbon Black over Ni Foam/NaCl-KCl Catalyst},
journal = {Processes},
year = {2023},
volume = {11},
number = {2},
pages = {360},
doi = {10.3390/pr11020360}
}
EUVIMED