Hydrogen Production by Methane Pyrolysis in Molten Cu-Ni-Sn Alloys
Metals · 21.07.2023 · 13 (7) · 1310
DOI: 10.3390/met13071310 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 21.07.2023. Verfasst von David Scheiblehner und 4 weiteren Autor:innen. Die Arbeit wurde bisher 34-mal zitiert (Crossref) und nennt 64 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Hydrogen is an essential vector for transitioning today’s energy system. As a fuel or reactant in critical industrial sectors such as transportation and metallurgy, H2 can diversify the energy mix and supply and provide an opportunity to mitigate greenhouse-gas emissions. The pyrolysis of methane in liquid catalysts represents a promising alternative to producing hydrogen, as its energy demand is comparable to steam methane reforming, and no CO2 is produced in the base reaction. In this work, methane pyrolysis experiments were conducted using a graphite crucible filled with liquid ternary Cu-Ni-Sn alloys at 1160.0 °C. A statistical design of experiments allowed the generation of a model equation that predicts the achievable conversion rates in the ranges of the experiments. Furthermore, the experimental results are evaluated considering densities as well as surface tensions and viscosities in the investigated system, calculated with Butler and KRP equations, respectively. The highest methane conversion rate of 40.15% was achieved utilizing a melt of pure copper. The findings show that a combination of high catalytic activity with a high density and a low viscosity and surface tension of the melt results in a higher hydrogen yield. Furthermore, the autocatalytic effect of pyrolysis carbon is measured.
Zitieren
APA
Scheiblehner, D., Antrekowitsch, H., Neuschitzer, D., Wibner, S., & Sprung, A. (2023). Hydrogen Production by Methane Pyrolysis in Molten Cu-Ni-Sn Alloys. Metals, 13(7), 1310. https://doi.org/10.3390/met13071310
Vancouver
Scheiblehner D, Antrekowitsch H, Neuschitzer D, Wibner S, Sprung A. Hydrogen Production by Methane Pyrolysis in Molten Cu-Ni-Sn Alloys. Metals. 2023;13(7):1310. doi:10.3390/met13071310
BibTeX
@article{Scheiblehner2023,
author = {Scheiblehner, David and Antrekowitsch, Helmut and Neuschitzer, David and Wibner, Stefan and Sprung, Andreas},
title = {Hydrogen Production by Methane Pyrolysis in Molten Cu-Ni-Sn Alloys},
journal = {Metals},
year = {2023},
volume = {13},
number = {7},
pages = {1310},
doi = {10.3390/met13071310}
}
EUVIMED