EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Size Classification and Material Sorting of Fine Powders with a Deflector Wheel Air Classifier and an Electrostatic Separator

Mohamed Abohelwa, Annett Wollmann, Bernd Benker, Alexander Plack, Mehran Javadi, Alfred P. Weber

Powders · 12.11.2024 · 3 (4) · 550-573

DOI: 10.3390/powders3040029 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Powders, online erschienen am 12.11.2024. Verfasst von Mohamed Abohelwa und 5 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: German Research Foundation (DFG).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, a two-dimensional separation of microparticles based on their settling velocity and triboelectric charge ability is achieved using an air classifier for size fractionation and simultaneous charging, followed by an electrostatic separator. In the first part, considerations for enhancing particle classification with high sharpness and low-pressure drops are discussed through improvements in blade design investigated with CFD simulations and validated experimentally. Blades with extended lengths towards the center of the classifier prevent the formation of high-velocity vortices, thereby minimizing the back-mixing of particles and enhancing separation sharpness. This approach also reduces pressure drops associated with these flow vortices. In the second part of the study, the modified blades within the classifier are utilized for two-dimensional separation. Powders from two different materials are fed into the classification system, where particles become triboelectrically charged, mainly through collisions with the walls of the classification system components. Coarse particles are rejected at the wheel and exit the classifier, while differently charged fine particles of the two materials are directed into an electrostatic separator for material sorting. An enrichment of approximately 25–35% for both materials has been achieved on the electrodes of the separator.

Förderung

  • German Research Foundation (DFG)

Zitieren

APA

Abohelwa, M., Wollmann, A., Benker, B., Plack, A., Javadi, M., & Weber, A. P. (2024). Size Classification and Material Sorting of Fine Powders with a Deflector Wheel Air Classifier and an Electrostatic Separator. Powders, 3(4), 550-573. https://doi.org/10.3390/powders3040029

Vancouver

Abohelwa M, Wollmann A, Benker B, Plack A, Javadi M, Weber AP. Size Classification and Material Sorting of Fine Powders with a Deflector Wheel Air Classifier and an Electrostatic Separator. Powders. 2024;3(4):550-573. doi:10.3390/powders3040029

BibTeX
@article{Abohelwa2024,
  author = {Abohelwa, Mohamed and Wollmann, Annett and Benker, Bernd and Plack, Alexander and Javadi, Mehran and Weber, Alfred P.},
  title = {Size Classification and Material Sorting of Fine Powders with a Deflector Wheel Air Classifier and an Electrostatic Separator},
  journal = {Powders},
  year = {2024},
  volume = {3},
  number = {4},
  pages = {550--573},
  doi = {10.3390/powders3040029}
}
Kostenlos starten →