Poly(ε-caprolactone)-Based Hierarchical Porous Scaffolds Fabricated by a One-Step High Internal Phase Emulsion Templating Method for Bone Tissue Engineering
Polymers · 20.11.2026 · 18 (22) · 2913
DOI: 10.3390/polym18222913 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 20.11.2026. Verfasst von Wenbang Liao und 8 weiteren Autor:innen. Die Arbeit nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shenzhen Science and Technology Innovation Commission.
Abstract (Originalsprache)
Polymer-based scaffolds are promising for tissue engineering, but conventional fabrication methods often involve complex processes. Here, a poly(ε-caprolactone) (PCL)-based scaffold with a hierarchical porous architecture was fabricated using a one-step high internal phase emulsion (HIPE) templating strategy. The scaffold exhibited approximately 90% porosity, with average large and small pore sizes of 270 and 15 μm, respectively, providing an interconnected architecture favorable for cell adhesion and nutrient transport. Optimization of the divinylbenzene (DVB)/ethylene glycol dimethacrylate (EGDMA) ratio improved mechanical performance, achieving maximum compressive modulus of 681.2 kPa and the highest compressive stress at 50% strain of 87.9 kPa. After 21 days of in vitro biomimetic mineralization, hydroxyapatite deposition was observed on the scaffold surface. Furthermore, Wistar rat bone marrow mesenchymal stem cells (BMSCs) exhibited sustained adhesion and proliferation during 5 days of in vitro culture, indicating favorable cytocompatibility. This study presents a facile one-step HIPE templating strategy for fabricating hierarchical porous PCL-based scaffolds with tunable architectures and promising potential for bone tissue engineering.
Förderung
- Shenzhen Science and Technology Innovation Commission
Zitieren
APA
Liao, W., Yang, M., Li, M., Du, Q., Hu, Y., Li, D., Nan, Y., Zhang, Z., & Sun, D. (2026). Poly(ε-caprolactone)-Based Hierarchical Porous Scaffolds Fabricated by a One-Step High Internal Phase Emulsion Templating Method for Bone Tissue Engineering. Polymers, 18(22), 2913. https://doi.org/10.3390/polym18222913
Vancouver
Liao W, Yang M, Li M, Du Q, Hu Y, Li D, et al. Poly(ε-caprolactone)-Based Hierarchical Porous Scaffolds Fabricated by a One-Step High Internal Phase Emulsion Templating Method for Bone Tissue Engineering. Polymers. 2026;18(22):2913. doi:10.3390/polym18222913
BibTeX
@article{Liao2026,
author = {Liao, Wenbang and Yang, Meng and Li, Maoning and Du, Qingyuan and Hu, Yunpeng and Li, Dandan and Nan, Yu and Zhang, Zhi and Sun, Dazhi},
title = {Poly(ε-caprolactone)-Based Hierarchical Porous Scaffolds Fabricated by a One-Step High Internal Phase Emulsion Templating Method for Bone Tissue Engineering},
journal = {Polymers},
year = {2026},
volume = {18},
number = {22},
pages = {2913},
doi = {10.3390/polym18222913}
}
EUVIMED