Novel Antibacterial Coating Containing Dimethylaminohexadecyl Methacrylate for Provisional Dental Crowns: Physicomechanical Properties and Oral Biofilm Inhibition
Polymers · 18.11.2026 · 18 (22) · 2894
DOI: 10.3390/polym18222894 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 18.11.2026. Verfasst von Abdullah Alhussein und 10 weiteren Autor:innen. Die Arbeit nennt 83 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Provisional crown restorations are commonly used in dentistry, but they often accumulate oral plaques, leading to gingival inflammation and recurrent caries. This study aimed to develop a photo-cured antibacterial coating containing dimethylaminohexadecyl methacrylate (DMAHDM) for provisional crowns. DMAHDM was incorporated at 0, 2.5, 5.0, 7.5, and 10% into an equal-mass bisphenol A-glycidyl methacrylate/triethylene glycol dimethacrylate matrix and applied to commercial TEMPSMART crown composite. Uncoated TEMPSMART and OptiGuard served as controls. Degree of polymerization conversion, paste flowability, contact angle, surface roughness, shear bond strength, and antibacterial activity were evaluated. Degree of conversion varied insignificantly (51–53%, p > 0.05). DMAHDM-containing coatings showed greater paste flowability than commercial coating control, while the coated surfaces exhibited lower roughness than uncoated TEMPSMART (p < 0.05). Shear bond strength ranged from 9.3 ± 2.2 to 10.0 ± 2.1 MPa, comparable to OptiGuard (9.9 ± 2.4 MPa) (p > 0.05). All DMAHDM groups achieved over 6-log reduction in biofilm colony-forming units (p < 0.05). Biofilm metabolic activity was reduced by 97%; biofilm lactic acid production was reduced by 92–96% (p < 0.05). Therefore, DMAHDM coating demonstrated potent antibacterial activity without compromising physicomechanical properties, demonstrating potential for reducing biofilms at provisional crown margins.
Zitieren
APA
Alhussein, A., Alfaifi, A., Almutairi, N., Almujel, S. H., Altamimi, Y., Alghamdi, S., Almusa, A., Sun, J., Almohareb, T., Weir, M. D., & Xu, H. H. K. (2026). Novel Antibacterial Coating Containing Dimethylaminohexadecyl Methacrylate for Provisional Dental Crowns: Physicomechanical Properties and Oral Biofilm Inhibition. Polymers, 18(22), 2894. https://doi.org/10.3390/polym18222894
Vancouver
Alhussein A, Alfaifi A, Almutairi N, Almujel SH, Altamimi Y, Alghamdi S, et al. Novel Antibacterial Coating Containing Dimethylaminohexadecyl Methacrylate for Provisional Dental Crowns: Physicomechanical Properties and Oral Biofilm Inhibition. Polymers. 2026;18(22):2894. doi:10.3390/polym18222894
BibTeX
@article{Alhussein2026,
author = {Alhussein, Abdullah and Alfaifi, Areej and Almutairi, Nader and Almujel, Saad H. and Altamimi, Yazeed and Alghamdi, Sarah and Almusa, Arwa and Sun, Jirun and Almohareb, Thamer and Weir, Michael D. and Xu, Hockin H. K.},
title = {Novel Antibacterial Coating Containing Dimethylaminohexadecyl Methacrylate for Provisional Dental Crowns: Physicomechanical Properties and Oral Biofilm Inhibition},
journal = {Polymers},
year = {2026},
volume = {18},
number = {22},
pages = {2894},
doi = {10.3390/polym18222894}
}
EUVIMED