Development of Remineralizing and Antibacterial Resin Coating for Provisional Crowns with Improved Bond Strength and Wear Resistance
Polymers · 12.04.2026 · 18 (8) · 945
DOI: 10.3390/polym18080945 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 12.04.2026. Verfasst von Ibrahim Ba-Armah und 10 weiteren Autor:innen. Beteiligte Einrichtung: Dental Biomedical Sciences PhD Program, Graduate School, University of Maryland, Baltimore, MD 21201, USA. Die Arbeit nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NIDCR NIH HHS, NIH.
Abstract (Originalsprache)
Secondary caries and biofilm accumulation remain major causes of failure in provisional crowns and restorations, highlighting the need for multifunctional resin coatings with antibacterial and remineralizing capabilities. This study aimed to develop a novel bioactive and antibacterial resin-based surface coating incorporating 10% dimethylaminododecyl methacrylate (DMADDM), 20% nanoparticles of amorphous calcium phosphate (NACP), and/or 20% calcium fluoride nanoparticles (nCaF2) within a urethane dimethacrylate/triethylene glycol divinylbenzyl ether (UDMA/TEG-DVBE) matrix. Coatings were evaluated for degree of conversion (DC), flow, shear bond strength, brushing wear resistance (10,000 cycles), and calcium (Ca), phosphate (PO4), and fluoride (F) ion release up to 70 days. All groups achieved clinically acceptable polymerization, with the lowest DC at 50%. NACP-containing coatings significantly increased shear bond strength to 18.3 ± 2.8 MPa, representing a ~170% increase compared with the experimental control (6.8 ± 2.1 MPa) and exceeding the ISO 10477 minimum threshold of 5 MPa. After brushing simulation, experimental coatings demonstrated low wear depth (0.93–1.19 µm), which was ~40% lower than the commercial control (1.85 ± 0.40 µm). Sustained ion release was achieved for 70 days, with 20% NACP-formula releasing 1.22 mmol/L Ca and 0.90 mmol/L PO4, while the dual NACP–nCaF2 formulation provided simultaneous Ca (0.62 mmol/L) and F (0.33 mmol/L) release. The developed coatings demonstrated promising physicochemical properties, bonding performance, wear resistance, and sustained remineralizing ion release, supporting their potential application as therapeutic surface coatings for provisional restorations.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Dental Biomedical Sciences PhD Program, Graduate School, University of Maryland, Baltimore, MD 21201, USA.
- Department of Biomaterials and Regenerative Dental Medicine, University of Maryland School of Dentistry, Baltimore, MD 21201, USA.
- Department of Restorative Dental Sciences, College of Dentistry, Imam Abdulrahman Bin Faisal University, Dammam 31441, Saudi Arabia.
- Department of Restorative Dental Science, College of Dentistry, King Saud University, Riyadh 11545, Saudi Arabia.
- Department of Conservative Dental Sciences, College of Dentistry, Prince Sattam bin Abdulaziz University, Alkharj 16245, Saudi Arabia.
- Department of Restorative Dental Sciences, College of Dentistry, University of Hail, Hail 55475, Saudi Arabia.
ORCID-Profile: Ibrahim Ba-Armah, Abdullah Alhussein, Nader Almutairi, Mohammad Alenizy, Jirun Sun
Förderung
- NIDCR NIH HHS
- NIH
Zitieren
APA
Ba-Armah, I., Alhussein, A., Almutairi, N., Alenizy, M., Alqarni, H., Altamimi, Y., Altamimi, A., Masri, R., Sun, J., Weir, M. D., & Xu, H. H. K. (2026). Development of Remineralizing and Antibacterial Resin Coating for Provisional Crowns with Improved Bond Strength and Wear Resistance. Polymers, 18(8), 945. https://doi.org/10.3390/polym18080945
Vancouver
Ba-Armah I, Alhussein A, Almutairi N, Alenizy M, Alqarni H, Altamimi Y, et al. Development of Remineralizing and Antibacterial Resin Coating for Provisional Crowns with Improved Bond Strength and Wear Resistance. Polymers. 2026;18(8):945. doi:10.3390/polym18080945
BibTeX
@article{BaArmah2026,
author = {Ba-Armah, Ibrahim and Alhussein, Abdullah and Almutairi, Nader and Alenizy, Mohammad and Alqarni, Heba and Altamimi, Yazeed and Altamimi, Ayman and Masri, Radi and Sun, Jirun and Weir, Michael D and Xu, Hockin H K},
title = {Development of Remineralizing and Antibacterial Resin Coating for Provisional Crowns with Improved Bond Strength and Wear Resistance},
journal = {Polymers},
year = {2026},
volume = {18},
number = {8},
pages = {945},
doi = {10.3390/polym18080945}
}
EUVIMED