EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Ultraviolet-Induced Surface Modification of Virgin and Recycled Polypropylene Fibers: Modification Technology, Functionalization Mechanism and Its Application in Cement-Based Materials

Jianfeng Wang, Peida Yang, Yang Zhao, Tianxiang Ren, Na Li, Ping Jiang, Haihua Zhan, Yonghui Zhang

Polymers · 10.11.2026 · 18 (22) · 2809

DOI: 10.3390/polym18222809 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 10.11.2026. Verfasst von Jianfeng Wang und 7 weiteren Autor:innen. Die Arbeit nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shaoxing Science and Technology Program.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Virgin and recycled polypropylene fibers (PPF and rPPF) can reinforce cement-based materials, but their surface inertness limits interfacial bonding. This review examines ultraviolet (UV)-induced surface modification, linking changes in surface chemistry, morphology and wettability with fiber integrity, interfacial behavior and composite performance. UV-induced photo-oxidation introduces polar functional groups and modifies surface morphology, potentially improving fiber–matrix compatibility and mechanical performance. However, these benefits depend on irradiation conditions, fiber characteristics and matrix composition. In one cement-paste study using 2 vol.% PPF, UV treatment increased 28-day compressive strength at room temperature by 24% and residual compressive strength after exposure to 200 °C by 18%, relative to specimens containing the same dosage of untreated PPF. For rPPF, pre-existing oxidation and recycling-related variability require treatment conditions tailored to its initial state. Excessive irradiation may degrade fiber properties, highlighting the need to balance surface functionalization with mechanical integrity. Limited mechanistic evidence, long-term performance data and standardized protocols remain key challenges. This review identifies the potential and limitations of UV modification and outlines research needs for its application to virgin and recycled polypropylene fibers in cement-based materials.

Förderung

  • Shaoxing Science and Technology Program

Zitieren

APA

Wang, J., Yang, P., Zhao, Y., Ren, T., Li, N., Jiang, P., Zhan, H., & Zhang, Y. (2026). Ultraviolet-Induced Surface Modification of Virgin and Recycled Polypropylene Fibers: Modification Technology, Functionalization Mechanism and Its Application in Cement-Based Materials. Polymers, 18(22), 2809. https://doi.org/10.3390/polym18222809

Vancouver

Wang J, Yang P, Zhao Y, Ren T, Li N, Jiang P, et al. Ultraviolet-Induced Surface Modification of Virgin and Recycled Polypropylene Fibers: Modification Technology, Functionalization Mechanism and Its Application in Cement-Based Materials. Polymers. 2026;18(22):2809. doi:10.3390/polym18222809

BibTeX
@article{Wang2026,
  author = {Wang, Jianfeng and Yang, Peida and Zhao, Yang and Ren, Tianxiang and Li, Na and Jiang, Ping and Zhan, Haihua and Zhang, Yonghui},
  title = {Ultraviolet-Induced Surface Modification of Virgin and Recycled Polypropylene Fibers: Modification Technology, Functionalization Mechanism and Its Application in Cement-Based Materials},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {22},
  pages = {2809},
  doi = {10.3390/polym18222809}
}
Kostenlos starten →