EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Modification of Polypropylene Fibers with Sodium Silicate: Enhancement of Pozzolanic Properties in Cement-Based Systems

Yahya Kaya, Petek Balcı iD, Süleyman Özen iD, Ali Mardani iD, Ali Kara

Polymers · 01.12.2025 · 17 (23) · 3206

DOI: 10.3390/polym17233206 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 01.12.2025. Verfasst von Yahya Kaya und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Civil Engineering, Faculty of Engineering, Bursa Uludag University, 16059 Bursa, Turkey. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the effect of sodium-silicate-based chemical surface modification of polypropylene (PP) fibers on the mechanical and fresh-state properties of cementitious composites. The proposed method introduces silanol and siloxane groups onto the PP surface through a radical-assisted chlorination route, aiming to enhance fiber–matrix interfacial bonding. Modified fibers increased the polycarboxylate ether (PCE) demand by 100% compared to the control mixture, while unmodified PP fibers caused a 58% increase at equivalent workability. The incorporation of PP fibers resulted in limited changes in compressive strength (1-7%), whereas silicate-modified fibers led to notable late-age flexural strength gains of 10% (28 days) and 17% (56 days). Scanning Electron Microscopy-Energy Dispersive X-ray Spectroscopy (SEM-EDX) and Fourier Transform Infrared Spectroscopy (FTIR) analyses confirmed successful surface functionalization, while the heterogeneous silicate deposition still contributed positively to interfacial transition zone (ITZ) performance. Overall, sodium-silicate-modified PP fibers improve flexural behavior and interfacial bonding in cement-based systems, offering a promising approach for enhanced mechanical performance and sustainability.

Schlagwörter

Stichwörter der Autor:innen

PP fibercementitious systempozzolanic propertiessodium silicate

Autor:innen und Institutionen

  • Department of Civil Engineering, Faculty of Engineering, Bursa Uludag University, 16059 Bursa, Turkey.
  • Department of Polymer Materials, Faculty of Arts and Sciences, Bursa Uludağ University, 16059 Bursa, Turkey.
  • Department of Civil Engineering, Faculty of Engineering and Natural Sciences, Bursa Technical University, 16310 Bursa, Turkey.
  • Department of Physical Chemistry, Faculty of Arts and Sciences, Bursa Uludag University, 16059 Bursa, Turkey.

ORCID-Profile: Petek Balcı, Süleyman Özen, Ali Mardani

Zitieren

APA

Kaya, Y., Balcı, P., Özen, S., Mardani, A., & Kara, A. (2025). Modification of Polypropylene Fibers with Sodium Silicate: Enhancement of Pozzolanic Properties in Cement-Based Systems. Polymers, 17(23), 3206. https://doi.org/10.3390/polym17233206

Vancouver

Kaya Y, Balcı P, Özen S, Mardani A, Kara A. Modification of Polypropylene Fibers with Sodium Silicate: Enhancement of Pozzolanic Properties in Cement-Based Systems. Polymers. 2025;17(23):3206. doi:10.3390/polym17233206

BibTeX
@article{Kaya2025,
  author = {Kaya, Yahya and Balcı, Petek and Özen, Süleyman and Mardani, Ali and Kara, Ali},
  title = {Modification of Polypropylene Fibers with Sodium Silicate: Enhancement of Pozzolanic Properties in Cement-Based Systems},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {23},
  pages = {3206},
  doi = {10.3390/polym17233206}
}
Kostenlos starten →