EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Removal of Cu(II) from Aqueous Medium Using Chitosan/nSiO2 Nanocomposite: Fixed-Bed Adsorption Study and Modeling

Samanwita Bhattacharya iD, Nirjhar Bar iD, Baisali Rajbansi iD, Sudip Kumar Das iD

Polymers · 08.11.2026 · 18 (21) · 2791

DOI: 10.3390/polym18212791 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 08.11.2026. Verfasst von Samanwita Bhattacharya und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering, University of Calcutta, 92, A. P. C. Road, Kolkata 700009, India. Die Arbeit nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The study aims to use Chitosan/nSiO2 Nanocomposite (CSNC) as an adsorbent to eliminate toxic Cu(II) ions from its aqueous solution using a fixed-bed continuous column system. nSiO2 was synthesized from rice husk ash. The adsorption investigations were performed at optimum pH 6.5 under different operating conditions, such as bed height (3–7 cm), influent flow rates (30–50 mL min−1), and influent Cu(II) concentration (10–30 mg L−1). The removal of Cu(II) was increased with the column’s bed depth but reduced with flow rate and adsorbate concentration. Experimental observations were employed to study seven kinetic models. The Thomas model was confirmed to be the best-fit kinetic model corresponding to 3 cm bed height, a column diameter of 1.5 cm, 30 mL min−1 flow rate, and an initial metal concentration of 30 mg L−1. A regeneration study and scale-up design were also reported. MLR (R2 > 0.98) and GA techniques (R2 = 1) were also applied to forecast the elimination of Cu(II). The performance of the prepared nanocomposite adsorbent was evaluated on a laboratory scale for removing Cu(II) from synthetic wastewater. This study integrates sustainability and circular economy principles in the application of adsorbents by focusing on their synthesis, utilization in fixed-bed continuous column systems, regeneration, and safe disposal.

Schlagwörter

Stichwörter der Autor:innen

Thomas modelbreakthrough curvechitosangenetic algorithmnanocomposite

Autor:innen und Institutionen

  • Department of Chemical Engineering, University of Calcutta, 92, A. P. C. Road, Kolkata 700009, India.
  • St. James' School, 165, A. J. C. Bose Road, Kolkata 700014, India.

ORCID-Profile: Samanwita Bhattacharya, Nirjhar Bar, Baisali Rajbansi, Sudip Kumar Das

Zitieren

APA

Bhattacharya, S., Bar, N., Rajbansi, B., & Das, S. K. (2026). Removal of Cu(II) from Aqueous Medium Using Chitosan/nSiO2 Nanocomposite: Fixed-Bed Adsorption Study and Modeling. Polymers, 18(21), 2791. https://doi.org/10.3390/polym18212791

Vancouver

Bhattacharya S, Bar N, Rajbansi B, Das SK. Removal of Cu(II) from Aqueous Medium Using Chitosan/nSiO2 Nanocomposite: Fixed-Bed Adsorption Study and Modeling. Polymers. 2026;18(21):2791. doi:10.3390/polym18212791

BibTeX
@article{Bhattacharya2026,
  author = {Bhattacharya, Samanwita and Bar, Nirjhar and Rajbansi, Baisali and Das, Sudip Kumar},
  title = {Removal of Cu(II) from Aqueous Medium Using Chitosan/nSiO2 Nanocomposite: Fixed-Bed Adsorption Study and Modeling},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {21},
  pages = {2791},
  doi = {10.3390/polym18212791}
}
Kostenlos starten →