EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Chitosan/Cellulose Functional Composite Hydrogel as Adsorbent for the Removal of Cu(II) from Aqueous Solutions in Dynamic Adsorption System

Katarina Stanković, Igor Telečki, Danijela Smiljanić, Danica Bajuk-Bogdanović, Jelena Potočnik, Ljiljana Veselinović, Ksenija Kumrić

Polysaccharides · 09.03.2026 · 7 (1) · 30

DOI: 10.3390/polysaccharides7010030 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polysaccharides, online erschienen am 09.03.2026. Verfasst von Katarina Stanković und 6 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science, Technological Development, and Innovation of the Republic of Serbia, Science Fund of the Republic of Serbia.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Water contamination by heavy metals remains a major global challenge, requiring efficient, sustainable, and low-cost remediation materials. Chitosan and cellulose are recognized as effective biosorbents due to their high affinity toward metal ions, biodegradability, and availability. However, their individual limitations motivate the design of composite with enhanced properties. In this study, chitosan/cellulose composite hydrogel beads crosslinked with glutaraldehyde (CHB-CF-GLA) were synthesized and evaluated for Cu(II) removal under batch and dynamic conditions. The composite was characterized by FESEM-EDS, ATR-FTIR, XRD, swelling analysis, and determination of pHpzc to elucidate its structural and physicochemical features. Batch experiments optimized pH, initial Cu(II) concentration, and adsorption capacity, while non-linear kinetic and isotherm models described the adsorption mechanism. The adsorbent exhibited good stability and reusability over multiple cycles. Fixed-bed column studies demonstrated that increasing bed height prolonged breakthrough and exhaustion times, while higher influent concentrations and flow rates led to earlier column saturation. The experimental breakthrough curves were well described by the Thomas and Yoon–Nelson models, whereas the Adams–Bohart model showed limited applicability. COMSOL Multiphysics 3.5 simulations validated the experimental data and predicted column performance. Overall, CHB-CF-GLA is an efficient and functional adsorbent with strong potential for continuous Cu(II) removal in water treatment applications.

Förderung

  • Ministry of Science, Technological Development, and Innovation of the Republic of Serbia
  • Science Fund of the Republic of Serbia

Zitieren

APA

Stanković, K., Telečki, I., Smiljanić, D., Bajuk-Bogdanović, D., Potočnik, J., Veselinović, L., & Kumrić, K. (2026). Chitosan/Cellulose Functional Composite Hydrogel as Adsorbent for the Removal of Cu(II) from Aqueous Solutions in Dynamic Adsorption System. Polysaccharides, 7(1), 30. https://doi.org/10.3390/polysaccharides7010030

Vancouver

Stanković K, Telečki I, Smiljanić D, Bajuk-Bogdanović D, Potočnik J, Veselinović L, et al. Chitosan/Cellulose Functional Composite Hydrogel as Adsorbent for the Removal of Cu(II) from Aqueous Solutions in Dynamic Adsorption System. Polysaccharides. 2026;7(1):30. doi:10.3390/polysaccharides7010030

BibTeX
@article{Stankovi2026,
  author = {Stanković, Katarina and Telečki, Igor and Smiljanić, Danijela and Bajuk-Bogdanović, Danica and Potočnik, Jelena and Veselinović, Ljiljana and Kumrić, Ksenija},
  title = {Chitosan/Cellulose Functional Composite Hydrogel as Adsorbent for the Removal of Cu(II) from Aqueous Solutions in Dynamic Adsorption System},
  journal = {Polysaccharides},
  year = {2026},
  volume = {7},
  number = {1},
  pages = {30},
  doi = {10.3390/polysaccharides7010030}
}
Kostenlos starten →