EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Recent Advances in Lignin-Based Wood Adhesives: Curing Behavior and Water Resistance

Yan Ma, Qian Zhang, Zhichao Lou iD

Polymers · 02.11.2026 · 18 (21) · 2718

DOI: 10.3390/polym18212718 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Polymers, online erschienen am 02.11.2026. Verfasst von Yan Ma und 2 weiteren Autor:innen. Beteiligte Einrichtung: National-Provincial Joint Engineering Research Center of Biomaterials for Machinery Package, Nanjing Forestry University, Nanjing 210037, China. Die Arbeit nennt 141 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key R&D Program of China, National Natural Science Foundation of China, Central Government Guiding Fund for Local Science and Technology Development-Rural Revi-talization.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lignin is a renewable aromatic feedstock for wood adhesives, but its structural heterogeneity complicates control over curing and water resistance. This review examines how lignin structure and functionalization govern curing reactions, kinetics, and crosslinked network development in lignin-based wood adhesives, and how these processes relate to bondline formation and wet bonding performance. Across condensation, epoxy, and polyurethane-based systems, molecular weight, aromatic condensation, and reactive-site accessibility influence lignin incorporation into polymer networks. However, chemical conversion, gelation, and effective network formation do not necessarily proceed in parallel; adhesive flow, penetration, and wood moisture further affect bondline development. Although crosslinking can reduce swelling and improve wet strength, faster curing or higher reactivity does not invariably yield better water resistance. The wet performance of wood joints also depends on network chemical stability, residual hydrophilic groups, interfacial bonding, and moisture-induced deformation and damage. Comparisons among studies remain limited by differences in lignin feedstocks, processing conditions, and water-exposure protocols. Future research should link curing kinetics, network architecture, moisture response, and interfacial failure under controlled testing conditions to establish verifiable structure–property relationships and guide formulation and processing.

Schlagwörter

Stichwörter der Autor:innen

crosslinked networkscuring behaviorligninwater resistancewood adhesives

Autor:innen und Institutionen

  • National-Provincial Joint Engineering Research Center of Biomaterials for Machinery Package, Nanjing Forestry University, Nanjing 210037, China.
  • Aica Nanjing Co., Ltd., Nanjing 210047, China.

ORCID-Profile: Zhichao Lou

Förderung

  • National Key R&D Program of China
  • National Natural Science Foundation of China
  • Central Government Guiding Fund for Local Science and Technology Development-Rural Revi-talization
  • Forest and Grassland Science and Technology Innovation Development and Research Project of the National Forestry and Grassland Administration
  • Qing Lan Project
  • Central Government Guiding Fund for Local Science and Technology Development-Rural Revitalization

Zitieren

APA

Ma, Y., Zhang, Q., & Lou, Z. (2026). Recent Advances in Lignin-Based Wood Adhesives: Curing Behavior and Water Resistance. Polymers, 18(21), 2718. https://doi.org/10.3390/polym18212718

Vancouver

Ma Y, Zhang Q, Lou Z. Recent Advances in Lignin-Based Wood Adhesives: Curing Behavior and Water Resistance. Polymers. 2026;18(21):2718. doi:10.3390/polym18212718

BibTeX
@article{Ma2026,
  author = {Ma, Yan and Zhang, Qian and Lou, Zhichao},
  title = {Recent Advances in Lignin-Based Wood Adhesives: Curing Behavior and Water Resistance},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {21},
  pages = {2718},
  doi = {10.3390/polym18212718}
}
Kostenlos starten →