EUVIMEDEUVIMED entdecken
Crossref

Polyacrylamide Graft Modification of Alkali Lignin for Formaldehyde‐Free Wood Adhesives With Enhanced Bonding Strength, Fracture Resistance, and Water Resistance

Yan Lyu, Ying Zhu, Guigan Fang, Shufang Wu, Yutao Yan, Jiongjiong Li

Polymer Engineering & Science · 29.09.2026

DOI: 10.1002/pen.70857 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Engineering & Science, online erschienen am 29.09.2026. Verfasst von Yan Lyu und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 35 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Jiangsu Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Developing formaldehyde‐free lignin‐based wood adhesives with balanced bonding strength, fracture resistance, and water resistance remains a considerable challenge. Herein, we propose a synergistic modification strategy integrating energy dissipation by grafted flexible polyacrylamide chains, epoxy‐mediated network formation, and wood interfacial reinforcement. Polyacrylamide‐grafted alkali lignin (PAMAL) was prepared through H 2 O 2 /CaCl 2 ‐initiated free‐radical graft polymerization of acrylamide in the presence of alkali lignin. The introduced flexible polyacrylamide side chains were designed to enhance chain entanglement, hydrogen‐bonding interactions, and energy‐dissipation capability. Subsequently, the epoxy crosslinker triglycidylamine (TGA) was incorporated to regulate adhesive viscosity, improve coating and penetration into wood, and promote epoxy‐mediated network formation during curing. Consequently, the optimized 2PAMAL/TGA adhesive exhibited a dry shear strength of 2.88 MPa, compared with 0.21 MPa for the unmodified lignin adhesive, while the bonded‐joint debonding work increased from 0.010 to 1.096 J. In addition, the moisture absorption decreased by 83.2%, the residual rate increased by 331.5%, and the wet shear strength reached 1.26 MPa after immersion in water at 63°C for 3 h when hot‐pressed at 190°C. These improvements are attributed to the synergistic effects of flexible‐chain energy dissipation, enhanced wood interfacial wetting/penetration, and epoxy‐mediated network stabilization.

Förderung

  • National Natural Science Foundation of China
  • Natural Science Foundation of Jiangsu Province

Zitieren

APA

Lyu, Y., Zhu, Y., Fang, G., Wu, S., Yan, Y., & Li, J. (2026). Polyacrylamide Graft Modification of Alkali Lignin for Formaldehyde‐Free Wood Adhesives With Enhanced Bonding Strength, Fracture Resistance, and Water Resistance. Polymer Engineering & Science. https://doi.org/10.1002/pen.70857

Vancouver

Lyu Y, Zhu Y, Fang G, Wu S, Yan Y, Li J. Polyacrylamide Graft Modification of Alkali Lignin for Formaldehyde‐Free Wood Adhesives With Enhanced Bonding Strength, Fracture Resistance, and Water Resistance. Polymer Engineering & Science. 2026. doi:10.1002/pen.70857

BibTeX
@article{Lyu2026,
  author = {Lyu, Yan and Zhu, Ying and Fang, Guigan and Wu, Shufang and Yan, Yutao and Li, Jiongjiong},
  title = {Polyacrylamide Graft Modification of Alkali Lignin for Formaldehyde‐Free Wood Adhesives With Enhanced Bonding Strength, Fracture Resistance, and Water Resistance},
  journal = {Polymer Engineering & Science},
  year = {2026},
  doi = {10.1002/pen.70857}
}
Kostenlos starten →